CW0101R300JE123

Series:	CW
Packaging:	Bulk
Part Status:	Active
Resistance:	1.3 Ohms
Tolerance:	±5%
Power (Watts):	13W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.375" Dia x 1.781" L (9.52mm x 45.24mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors typically feature cylindrical axial leads whose diameter matches that of the component body, or greater. By affixing the component body directly to the required board, these components remove the need for spacers and allow for an improved heat transfer in applications requiring additional heat sinking.The CW0101R300JE123 is a through hole resistor that is used in a variety of common applications. This resistor is composed of a carbon composition that is composed of primarily carbon and binders. This material is then heat-dried, cured, and cut to a specific length. The resistance of the resistor is controlled by the length and cross-sectional area of the resistor body.The CW0101R300JE123 is an axial leaded resistor that is designed to be used in high-density, PCB-mounted applications. Its size is low, yet its resistance is precisely controlled with the help of a thick, nickel plated resistive element. This product is an excellent choice for high-temperature, as it can handle temperatures up to 125°C without deteriorating its performance. Additionally, its power dissipation is also good, as its maximum power rating is 300mW.The main application field of the CW0101R300JE123 is in high-density circuit boards that require precision-controlled resistances. These boards typically make use of this component in order to ensure that the electrical signals are attenuated or reflected back at a desired level. This component is therefore particularly well-suited for use in amplifier circuits, for precision-controlled signal splitting, and for feedback loop circuits.The working principle of the CW0101R300JE123 is based on Ohm’s law. When a voltage is applied across the resistive element of the component, a current is produced that is proportional to the applied voltage. The resistor, however, limits the amount of current that is allowed to flow. Thus, a decrease in the resistance results in an increase in the current that flows. Conversely, an increase in the resistance results in a decrease in the current that flows. The resistance of the resistor can also be adjusted by adjusting its length or cross-sectional area.Due to the features of this component, it is easy to use, highly reliable, and suitable for a variety of electronic applications. Furthermore, its extended lifetime minimizes the amount of maintenance required, and it is also cost-effective due to its low price. It is often used in combination with other components in order to create more complex circuits.In conclusion, the CW0101R300JE123 is an axial leaded resistor that is made of carbon composition and is suitable for a variety of high-density applications. Its working principle is based on Ohm’s law, in which the resistance of the resistor is controlled by its length and cross-sectional area. Thanks to its excellent electrical characteristics, it can be used for precision-controlled signal splitting, feedback loop circuits, and amplifier circuits. Moreover, it is highly reliable, easy to use, and cost-effective.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description