CW01020K00KE73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are the foundational building blocks of electronic circuit design. The CW01020K00KE73 is one type of through hole resistor and is an example of a carbon composite resistor. It is suitable for low-powerelectricsystems, and an important part of device circuitry.

Specifications

The CW01020K00KE73 has a resistance range of 10-20K ohms. It features a dielectric strength of 1 to 2 KVDC, and has an insulation resistance greater than 1000 Mohms. The resistor also has a maximum power rating of 6 watts, and a maximum voltage rating of 250 volts. This resistor has a Pb-Free finish, and meets RoHS requirements. Other specifications include maximum dissipation of 5.1 W, temperature coefficient (TCR) of ±100 ppm/°C, and capacitance of .85pF.

Application Fields

The CW01020K00KE73 is primarily used in low power electronics in resistor/inductor networks. It is also used in power supply circuits to control the voltage and current. The resistor is used in circuits to limit current in capacitors and transformers, and also as a currentpath from the power supply line. It can also be used in combination with various types of capacitors in order to form oscillators or voltage dividers. The CW01020K00KE73 can also be used in voltage stabilization circuits, RF generators, pulse circuits, and in high frequency filter circuits.

Working Principle

The CW01020K00KE73 works by using the Ohm\'s law, which states that the resistance of a component is directly proportional to the voltage applied across it. For instance, when a voltage is applied across a resistor it creates a small amount of heat and then dissipates it. This is why the CW01020K00KE73 is used as a current-limiting device; by controlling the amount of current passing through it, the resistor limits the amount of energy dissipated.

In general, the working principle of a through-hole resistor is the same as any other resistor. They are electronic components that control the flow of current in a circuit. The resistance offered by a resistor is determined by its value, and can be increased or decreased depending on the application.

Conclusion

The CW01020K00KE73 is a through-hole resistor that is suitable for low power electronics applications. It is used in circuits to limit current, as a current path from the power supply line, and to form oscillators or voltage dividers. The resistor works by using Ohm\'s law, and it can be used to regulate voltage and current in power supply circuits.

The specific data is subject to PDF, and the above content is for reference