CW01085R00KE123

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are a type of fixed resistor. Unlike most other components, they are not surface mounted. To be of use, they must be inserted through the hole in the board or panel upon which they are used.

The CW01085R00KE123 is a through-hole resistor, typically used in industrial electrical or electronic applications. It is made from conductive metal strips which have been wound onto a ceramic core and then coated in a protective plastic insulator. When an electrical current passes through the resistor, the strips generate a resistance to that current. This resistance works to reduce the current flow, allowing for more precise voltage control during applications.

As a through-hole resistor, the CW01085R00KE123 can be used in a variety of applications. Common ones include switching, motor control, building automation, and power conversion. The resistance range of this device is 0.05 to 0.5 Ohms and its power rating is 500mW. This makes it ideally suited for applications which require high power handling and exceptional levels of accuracy.

The working principle of the CW01085R00KE123 is quite simple. As electric current passes through the metal strips, the strips generate a resistance to the current, reducing its flow and allowing for more precise voltage control. The amount of resistance generated is determined by the characteristics of the material used in the resistor and the number of strips employed. The higher the resistance, the lower the current flow and thus, the greater the voltage control.

An important note on safety must be made when using the CW01085R00KE123. As it is a high power device, it should never be used in any application where it is exposed to high voltage. This is due to the fact that the resistor can overheat and potentially cause damage to the device or system it is installed in if exposed to excessive voltages. Additionally, the resistor must be properly mounted and the leads must be kept in good condition for it to work correctly.

In conclusion, the CW01085R00KE123 is a through-hole resistor which is ideally suited for applications that require high power handling and exceptional levels of accuracy. It works by generating a resistance to the electrical current, which reduces the current flow and allows for more precise voltage control. However, great care should be taken when using this device, as it is a high power device and can overheat if exposed to excessive voltage.

The specific data is subject to PDF, and the above content is for reference