CWD2425H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CWD2425H solid state relay is a type of electronic component that is used as part of a number of electronic systems, from industrial automation to traffic control systems. It typically consists of a semiconductor device, or a diode, that is used to control current flow in one direction while providing a level of isolation between two circuits. One of the main benefits of a solid state relay is that it is much more reliable and simpler to deploy than mechanical relays, since they are less prone to failure due to environmental factors such as humidity or dust.

The CWD2425H solid state relay is an Unipolar DC relay which is the most reliable for DC motor applications. It can be used in both positive and negative voltage applications and has an input/output voltage of up to 24V. With a maximum operating current of 25 Amps, this relay is capable of handling even the most demanding loads and switching frequencies. The relay also has a built-in delay timer, which allows for the switching of larger loads during the power-up or power-down process. This feature is especially useful for controlling ramp-up and ramp-down loads that are typically experienced in motor applications.

Working Principle: The CWD2425H solid state relay is based on the principle of a transistor. When a current is applied to the signal pin, a transistor is switched on and a current flows into the load. When current is removed from the signal pin, the transistor is switched off and the current in the load is interrupted. This current flow principle allows the relay to switch current based on the input signal without using any mechanical contact points. This allows for a much faster operation and a much longer life span than that of a mechanical relay.

The main application field of the CWD2425H solid state relay is in AC and DC motor applications. This relay can handle up to 25 amps of current and can be used for switching both positive and negative voltages. The built-in delay timer also allows for the smooth and efficient switching of ramp-up and ramp-down loads. The device can also be used for general purpose DC signal switching and can be integrated into a system for controlling traffic lights or factory automation.

The CWD2425H solid state relay is a reliable and easy to use component for a range of DC motor and signal applications. It is reliable, efficient and has a built-in delay timer for controlling ramp-up and ramp-down loads. With its ability to control current and voltage in both positive and negative directions, the CWD2425H can provide a reliable and safe solution for many motor and DC signal control applications.

The specific data is subject to PDF, and the above content is for reference