CWD48125P-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) have become a popular choice of power conversion in the industrial automation and control industry for many years. Their reliability and low cost make them an economical alternative to traditional electromechanical relays. The CWD48125P-10 is a type of SSR which is used in many automation and control applications. This article will discuss the application field and working principle of the CWD48125P-10.

The CWD48125P-10 is a 4-pin physical structure SSR, with a load current of 10AAC and a voltage drop of 25V. It is a single-pole, single-throw (SPST) SSR, making it suitable for various AC loads. This SSR is best suited for applications that require a higher power rating than the CWD48125P-05 which has a higher voltage drop of 5V but a lower current rating of 5AAC. The CWD48125P-10 has a thermal rating of 25 degrees Centigrade and an MTBF greater than 600,000 hours.

The CWD48125P-10 is often used in industrial automation, UPS systems, protection relays, robotics, medical equipment, and power conversion in general. It is mainly used for AC output control in appliances such as electric ovens, heaters, air conditioners, and electric motors. Its low cost, along with its small size, make it suitable for a variety of applications, as it requires minimal space. Being a high current SSR, the CWD48125P-10 is tailored for general-purpose applications.}

The working principle of the CWD48125P-10 is relatively simple. It uses a solid state switch to control the output current and voltage of an AC load through the use of an internal silicon-controlled rectifier (SCR). When the control input voltage is applied, the SCR will be switched on and allow the load current to flow through the SSR. When the control voltage is removed, the SCR will be switched off, preventing the load current from flowing.

Finally, the CWD48125P-10 comes with various features to increase its efficiency. It includes an LED which is visible from both sides of the PCB, indicating whether it is turned on or off. It also has surge and load protection which is provided by the internal SCR, as any parasitic voltage is blocked from passing through the SSR. The CWD48125P-10 also comes with built-in hysteresis to reduce the amount of power drawn from the device when it is not in use.

Overall, the CWD48125P-10 is a reliable and economical power conversion option for various industrial automation and control applications. Its internal SCR reduces the requirements for external protective components, while its built-in features provide protection against any potential hazards. This type of SSR is a perfect choice for applications that require an AC output control with higher power ratings.

The specific data is subject to PDF, and the above content is for reference