CWU2410P-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays are an integral part of most industrial and household electrical systems. The CWU2410P-10 solid state relay (SSR) is a non-contact control switch, which is designed specifically for high-frequency switching and noise suppression due to its low on-state resistance with minimal electrical arc interference. It is used in a variety of applications, where its major advantages over traditional mechanical contacts, such as low electrical noise, high contact reliability, reduced power consumption, and long life expectancy, make it an ideal choice.

The CWU2410P-10 SSR is designed for use in AC DC circuits up to 10A 250V AC or 24V DC. It is typically available in a 12-pin, sideways-mounted package where the control input has two pins for electrical connection and the output has eight pins for electrical connection. The pins are distributed on the top and bottom rows in a 1-6, 7-12 format. The control input pins have a built-in protection resistor, while the output pins have electrical arc suppression circuitry and bypass capacitors. The external components of this SSR are typically minimal, consisting only of a mounting bracket or heat sink.

The CWU2410P-10 SSR consists of two main parts: the control junction and the power junction. The control junction is a photocoupler consisting of a Transistor aperture, an LED light source, and a Photo-sensitive transistor. The LED light source is powered by the control input voltage (typically 24 Volt, DC) and causes current to flow through the transistor aperture. Since the transistor aperture is sensitive to light, when the LED is powered enough to generate light the photo-sensitive transistor is activated and enables current to flow to the output. The power junction consists of a high current and low on-state resistance bidirectional thyristor which is designed to switch on with very low voltage and is capable of providing a zero-crossing turn-on behavior and maintaining a high current on-state. The bidirectional thyristor also allows the CWU2410P-10 SSR to be used in both AC and DC circuits.

The CWU2410P-10 SSR is suited for applications that require switching frequencies of up to 100 kHz and rapid load response. Typical application fields include: motor control, lighting, HVAC, power supplies, and process control. The SSR also has the distinct advantage of being able to handle higher power loads, as well as providing greater noise suppression than mechanical contacts. These features make the CWU2410P-10 SSR an ideal choice for many industrial applications.

In conclusion, the CWU2410P-10 solid state relay is a highly reliable, low cost, high efficiency component for a wide variety of applications. Its low resistance and low noise form factor make it ideal for applications that require low frequency control or those subjected to high frequency noise from environmental sources, such as motor control and HVAC control. Its excellent thermal and low electrical arc interference characteristics provide improved reliability and longer life expectancy.

The specific data is subject to PDF, and the above content is for reference