CYBL10161-56LQXI

Power - Output:	3dBm
Package / Case:	56-UFQFN Exposed Pad
Operating Temperature:	-40°C ~ 105°C
Current - Transmitting:	12.5mA ~ 20mA
Current - Receiving:	16.4mA ~ 21.5mA
Voltage - Supply:	1.8 V ~ 5.5 V
GPIO:	36
Serial Interfaces:	I²C, SPI, UART
Memory Size:	128kB Flash, 8kB ROM, 16kB SRAM
Sensitivity:	-91dBm
Series:	--
Data Rate (Max):	1Mbps
Frequency:	2.4GHz
Modulation:	GFSK
Protocol:	Bluetooth v4.1
RF Family/Standard:	Bluetooth
Type:	TxRx + MCU
Part Status:	Obsolete
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

CYBL10161-56LQXI is an RF transceiver IC used in radio frequency communications. It is capable of both transmitting and receiving signals, and is useful for applications such as wireless communication systems. This article will explain the applications and working principles of the CYBL10161-56LQXI RF transceiver IC.

Application Field

CYBL10161-56LQXI RF transceiver ICs can be used in many different applications. These include the following:

• Wireless communication systems
• Cellular networks
• Radio navigation systems
• Wireless local area networks (WLANs)
• Wireless peripheral devices
• Radio frequency identification (RFID) devices

In each of these applications, the CYBL10161-56LQXI RF transceiver IC is used to send and receive signals, allowing the device to communicate with other devices wirelessly.

Working Principle

The CYBL10161-56LQXI RF transceiver IC works by using a combination of digital and analog circuitry. The digital part of the IC processes the data signals, and the analog part of the IC processes the radio frequency (RF) signals.The digital part of the IC processes the data signals by encoding them into a digital format. This allows the digital data to be sent over a wireless network.The analog part of the IC processes the RF signals by using a mixer, a low-noise amplifier (LNA), a power amplifier, and an antenna. The mixer is used to combine the input signal with a local oscillator signal, which shifts the signal frequency to the desired frequency.The LNA amplifies the signal without adding too much noise. The power amplifier amplifies the signal for transmission, and the antenna then radiates the signal into the atmosphere.

Conclusion

The CYBL10161-56LQXI RF transceiver IC is a useful device for applications requiring wireless communication. Its ability to process both digital and analog signals makes it suitable for a variety of applications, including wireless communication systems, cellular networks, radio navigation systems, WLANs, wireless peripheral devices, and RFID devices. The working principle of the IC involves the use of digital circuitry to process the data signals and analog circuitry to process the RF signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description