CYW20733A2KML1G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF transceiver ICs are circuit elements that enable two-way communication using radio frequency signals. The CYW20733A2KML1G is an such integrated circuit (IC) that allows for short-range wireless communications. This ULP ultimate low power Bluetooth 4.2 single-mode IC enables wireless data transfer over a frequency of 2.4 GHz.

The CYW20733A2KML1G includes many features suitable for low power Bluetooth applications. The power consumption and voltage requirements are very low, saving on costs, and extend the life of the battery. Its features include support for HCI, radio and BLE 4.2 protocols, as well as low power modes with sleep current of 40nA for on-board embedded applications. It also provides faster transmission speed (up to 24Mbps) within a short range (up to 10 meters) with less-than-20dBm class-2 output power.

The CYW20733A2KML1G is used in a wide variety of applications where low-power Bluetooth communication is necessary. This IC supports home and commercial automation, data transmission, and many medical and health-based applications. It is widely used as a Bluetooth interface in medical and healthcare applications such as pulse oximeters and drug delivery systems. The IC also finds a variety of other applications in anti-theft systems, industrial automation, home automation, and smart lighting.

The CYW20733A2KML1G combines an RF transceiver baseband processor, Bluetooth controller, and memory into a single-chip solution. The IC can be programmed using an HCI interface and software libraries. The IC supports frequency hopping with up to 79 hops per connection interval. It provides up to 155Mbps EDR packet throughput with a 2 Mbps data rate. It works in the 2.4GHz ISM band and supports antenna diversity.

The basic working principle of the CYW20733A2KML1G is the same as other RF transceiver ICs. It is capable of both receiving and sending data. A transmitter part of the IC will encodes the data received from the processor and modulates the data. The data is then encoded on to an RF carrier. The antenna radiates this modulated wave into space. This modulated wave is then transmitted to another device with an antenna and a compatible receiver for decoding the data.

At the receiving end, a decoder receiving the modulated signal analyses the signal, recreates the original signal, and sends it back to the processor. In order to receive data, the receiver must decode the signal received from the air and de-modulate it. The result is digital data that can be used by the processor. The CYW20733A2KML1G provides a low-cost, single-chip solution for short-range wireless communication.

The specific data is subject to PDF, and the above content is for reference