CZRF52C16

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Zener diodes are semiconductor devices with a wide range of applications. They are typically used to regulate the flow of electricity in electronic circuits, just like other diodes. Unlike regular diodes, Zener diodes allow some current to be conducted when a reverse bias voltage is applied to the diode. The amount of current conducted depends on the Zener voltage of the diode.

CZRF52C16 is a single Zener diode with a maximum average forward current of 1.0A and a specific zener voltage of 16V. The CZFR52C16 diode has a maximum reverse current of 100uA and a maximum power dissipation of 500mW. It has a maximum thermal resistance of 250°C/W and a maximum breakdown voltage of 17V. The CZFR52C16 is rated for operation up to 150°C and is available in a SOD-323 package.

The CZRF52C16 diode is used in a variety of applications, from power regulator circuits to voltage clamping circuits. In a power regulator circuit, the diode is connected to a power supply such that the diode allows current to pass through only when the voltage reaches the Zener voltage. This prevents the voltage from exceeding the Zener voltage, thus providing a regulated power supply. In voltage clamping applications, the diode is connected in reverse bias to a circuit such that any voltage spikes that may be generated will be clamped at the Zener voltage.

The CZRF52C16 diode is built upon a substrate of silicon and has a wide bandgap to allow it to conduct the high Zener voltage. It is constructed of two layers of doped silicon that are connected together by a third layer of lightly doped silicon. The heavily doped layer acts as the anode, while the lightly doped layer acts as the cathode. The Zener diode allows current to flow to the heavily doped layer when a voltage over the Zener voltage is applied. This builds an electric field that pulls electrons from the heavily doped layer to the lightly doped layer, thus allowing current to flow.

In summary, the CZRF52C16 is a single Zener diode with a maximum average forward current of 1.0A and a specific zener voltage of 16V. It is used in applications such as power regulator circuits and voltage clamping circuits. It is built upon a substrate of silicon and is constructed of two layers of doped silicon that are connected together. The Zener diode allows current to flow to the heavily doped layer when a voltage over the Zener voltage is applied.

The specific data is subject to PDF, and the above content is for reference