CZRQR52C13-HF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are essential components used in a variety of electronic applications. They are used to control the flow of current in order to accomplish certain tasks. One kind of diode is the Zener diode, which provides a stabilizing voltage to maintain a constant voltage across a device. The CZRQR52C13-HF is a single Zener diode typically used in stabilized power supplies, voltage regulators, and other non-polarized applications.

The CZRQR52C13-HF Zener diode has a nominal Zener voltage of 13 volts with a power rating of 500mW. It is constructed of a silicon crystal which is enclosed in a glass package. The primary characteristic of a Zener diode is its breakdown voltage, the voltage at which it “breaks down” and begins to conduct current. The CZRQR52C13-HF has a maximum reverse DC breakdown voltage of 35 Volts and a reverse current rating of 100 μA. This diode also has a series resistance of 18 Ω, which means that the diode drops a voltage equal to the voltage across the resistor.

The CZRQR52C13-HF Zener diode is typically used in voltage regulators and stabilized power supplies to provide a stabilizing voltage. In these applications, the Zener diode is placed in series with the load and connected to the power supply. The diode makes sure that the output voltage is maintained at a constant value, regardless of changes in the load or power supply. When the output voltage is greater than the Zener voltage of the diode, current will flow through the diode into the load. This current continues until the output voltage is equal to the Zener voltage, at which point the current flow stops and the output voltage is regulated. This principle is useful in applications such as voltage regulators, where it is important to maintain a constant output voltage, regardless of changes in the load or power supply.

The CZRQR52C13-HF Zener diode is also used in non-polarized circuits, where it provides a low-dropout voltage regulator. The diode is connected in a circuit to ground and a current-limiting resistor. When the voltage across the diode reaches the Zener voltage, it begins to conduct current. This current limits the voltage across the diode and prevents it from exceeding the Zener voltage. This type of circuit is commonly used in applications such as electronic timer circuits.

The CZRQR52C13-HF Zener Diode is a single component that is used in many different applications to provide a stabilized voltage. It is constructed out of a silicon crystal, enclosed in a glass package. It has a nominal Zener voltage of 13 volts and a power rating of 500mW with a maximum reverse DC breakdown voltage of 35 Volts and a reverse current rating of 100 μA. It is used in voltage regulators and stabilized power supplies to maintain a constant output voltage, as well as in non-polarized circuits to provide a low-dropout voltage regulator. This diode has a series resistance of 18 Ω, and is a useful component for a variety of applications.

The specific data is subject to PDF, and the above content is for reference