CZRU2V7B-HF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CZRU2V7B-HF is a Single Zener Diode most commonly used as a voltage regulator in current-limiting circuits. It is designed to accurately limit the voltage that can be established by the source to a safe and predetermined level by utilizing a reverse breakdown junction. Zener diodes can also be used as thermal regulators, voltage clippers, and voltage multipliers.

A Zener diode is a silicon semiconductor device which consists of a p-n junction. A Zener diode, unlike normal diodes that conduct only one way, can conduct both ways under certain conditions. When the p-n junction is forward biased or connected to a positive voltage, the typical behavior of a diode is observed. That is, it acts like a closed switch allowing current to flow. Conversely, when the junction is reversed biased by connecting it to a negative voltage, it acts like an open switch and no current is allowed to flow.

The CZRU2V7B-HF utilizes a special reverse breakdown junction. This junction is designed to allow a reverse current to flow when a specific breakdown voltage is exceed. The breakdown voltage is the voltage at which the junctions suddenly start to conduct in the reverse direction. This voltage is the precise voltage that is being regulated. As an example, if the breakdown voltage for a particular Zener diode is 7.5 volts, then no matter what the magnitude or polarity of the applied voltage is, the diode will not allow the voltage across it to exceed 7.5 volts.

The CZRU2V7B-HF is mainly used to regulate the output voltage of a power supply in computer circuit boards and other devices. To achieve this, the Zener diode is connected in series with the power supply and a voltage regulator. When the output voltage exceeds the breakdown voltage of the Zener diode, it will suddenly start to conduct in the reverse direction and draw current away from the power supply. This causes the regulator to regulate the output voltage and return it to a predetermined level. The breakdown voltage of CZRU2V7B-HF is 5.7V, making it ideal for regulating a voltage of 5.7V and below.

Zener diodes are also used for thermal regulation in certain electronic devices. As heat is generated by the device and the junction of the diode is increased, the Zener diode will regulate the temperature within the device. The Zener diode works in the same way as a current regulator but instead regulates the amount of heat released by the device. It also helps to protect the device from high levels of temperature which may damage it.

Another application of the CZRU2V7B-HF is in voltage clipper circuits. A voltage clipper is a circuit designed to limit the voltage augmentation of an applied signal. When the output signal exceeds the breakdown voltage of the Zener diode, it will start to conduct in the reverse direction and draw current away from the output. This helps to protect the device from receiving too much voltage, which could damage it.

CZRU2V7B-HF is also commonly used in voltage multiplier circuits. A voltage multiplier is designed to increase the voltage of an applied signal, usually through a series of capacitors. The Zener diode is used in the output stage of the multiplier circuit to ensure that the output voltage does not exceed the breakdown voltage of the diode and thus, no further increase in voltage will occur.

The CZRU2V7B-HF is a popular Zener diode mainly used for voltage regulation in current-limiting circuits, as well as other applications such as thermal regulation, voltage clipper circuits and voltage multiplier circuits. With its 5.7V breakdown voltage, it is ideal for use in applications which require a limited voltage of 5.7V and below.

The specific data is subject to PDF, and the above content is for reference