CZRUR52C4V3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CZRUR52C4V3 is a single Zener diode, typically used to provide a voltage reference in applications such as voltage regulation, edge detection, peak detection, and pulse generation. Specifically, this diode has a nominal Zener voltage of 4.3V and a 5% tolerance. It also has a maximum working current of 200 mA, an average forward current of 250 mA, and a minimum Zener impedance of 67 Ω.

A Zener diode is a special type of diode characterized by its special electrical properties. Unlike a standard diode, under reverse-bias operation, the electrical properties of a Zener diode remain relatively unchanged and therefore maintain a very specific voltage drop across the Zener junction. This property allows the Zener diode to be used as a voltage reference, as it can be relied upon to regulate a specific voltage across its terminals despite variations in the current flow.

In its most basic form, the CZRUR52C4V3 can be implemented as a voltage regulator. Here, the diode is connected across a resistive load with a voltage source greater than the Zener voltage (typically by 5 to 10%), with the load connected to the cathode and the source to the anode. Since the Zener diode acts as a one-way valve when conducting, the desired voltage is maintained across the load as the Zener diode conducts current when the voltage across its terminals exceeds its breakdown voltage, maintaining a constant voltage drop across the load.

The CZRUR52C4V3 can also be used for edge detection or peak detection applications. In these applications, the diode is used as a comparator, comparing the input voltage to a reference voltage set by the Zener diode. When the input voltage exceeds the reference voltage, the Zener diode will conduct, enabling or disabling a circuit depending upon the circuit configuration. This allows a circuit to detect changes in the input voltage and respond accordingly.

Finally, the CZRUR52C4V3 can be used for pulse generation. Here, the diode is used in combination with another component, typically a capacitor, to form an oscillator circuit. The capacitor is used to store and release energy, while the diode is used as a reference voltage to ensure each cycle of the capacitor’s oscillations begins and ends at the same voltage. This allows the circuit to generate a self-sustaining, periodic waveform.

In summary, the CZRUR52C4V3 is a single Zener diode primarily used as a voltage reference in voltage regulation, edge detection, peak detection, and pulse generation applications. With a nominal Zener voltage of 4.3V and a 5% tolerance, a maximum working current of 200 mA, and an average forward current of 250 mA, the diode features a minimum Zener impedance of 67 ohms, allowing it to be implemented in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference