D1050N12TXPSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

D1050N12TXPSA1 rectifiers are single diodes which are commonly used to convert line, alternating current (AC) to direct current (DC). They are widely applied in power supplies, battery charging systems, and voltage regulation circuits, such as in automotive and industrial equipment.

When the D1050N12TXPSA1 is in its reversed-bias mode it works as an open switch and almost completely blocks current from passing through it. On the other hand, when in its forward-biased mode current can pass through it. By alternating between these two directions, the D1050N12TXPSA1 is able to regulate the flow of current from one side to the other.

A D1050N12TXPSA1 diode has three important attributes: forward voltage drop (Vf), reverse breakdown voltage (Vr) and capacitance (CJ). The forward voltage drop is the voltage required to forward-bias and keep a current flowing through the diode. The reverse breakdown voltage is the maximum voltage that a diode can withstand in reverse-bias without any damage. The capacitance refers to the amount of AC current passing through a diode.

The D1050N12TXPSA1 rectifier is typically used in conjunction with other components, such as capacitors or transformers, to achieve its intended purpose. Common designs include half-wave and full-wave rectifiers, which are used to convert AC to DC. Half-wave rectifiers only allow the positive part of the AC cycle to pass through the diode, while full-wave rectifiers allow for the entire AC cycle to pass through the diode in both directions.

In a power supply, the D1050N12TXPSA1 diode is often used to regulate the voltage level in order to ensure that it is safe for the connected device. The diode works by blocking current from one direction and allowing current from the other direction to pass through. It can also be used to prevent back-EMF (electromotive force) when using motors or dynamos, or to protect against over-current situations.

The D1050N12TXPSA1 rectifier has a wide range of applications and is highly reliable. Its attributes make it suitable for a variety of power applications ranging from general-purpose to automotive, industrial, and military. Its forward voltage drop is low enough to enable the diode to operate in the lowest power range and the reverse breakdown voltage is high enough to allow the diode to handle the larger current in a power system. The capactiance is low enough for the diode to block unwanted AC noise and prevent interference.

The specific data is subject to PDF, and the above content is for reference