Allicdata Part #: | D170U25CXPSA1-ND |
Manufacturer Part#: |
D170U25CXPSA1 |
Price: | $ 163.79 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Infineon Technologies |
Short Description: | DIODE GEN PURP 2.5KV 210A |
More Detail: | Diode Standard 2500V 210A Stud Mount |
DataSheet: | D170U25CXPSA1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 147.40700 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 2500V |
Current - Average Rectified (Io): | 210A |
Voltage - Forward (Vf) (Max) @ If: | 2.15V @ 650A |
Speed: | Standard Recovery >500ns, > 200mA (Io) |
Current - Reverse Leakage @ Vr: | 5mA @ 2500V |
Capacitance @ Vr, F: | -- |
Mounting Type: | Stud Mount |
Package / Case: | DO-205AA, DO-8, Stud |
Supplier Device Package: | -- |
Operating Temperature - Junction: | -40°C ~ 140°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The D170U25CXPSA1 utilizes a rectifier design, which uses the principle of unilateral conduction of current in the diode bridge. The diode bridge works according to the principle of a full-Wave type rectifier. A full-Wave rectifier converts an alternating current (AC) into a direct current (DC) by using two phase-shifting diodes connected to opposite sides of a transformer, as well as a capacitor to filter out the AC current. The input voltage is applied to the bridge rectifier and then rectified by the two diodes. The rectifier converts the AC input voltage into a DC output voltage with a very low ripple.
The D170U25CXPSA1 provides basic protection against overload and over voltage. All applications using the rectifier must be able to operate with a minimum load of 6.3W and a load current of 0.3A. The rectifier is designed for industrial applications and is rated for a continuous current of up to 25A with a maximum peak surge current of 65A. The rectifier is also designed with a varistor for surge protection, which ensures reliable operation even in high surge and transient voltage applications.
The D170U25CXPSA1 is designed with a high temperature heat sink and over-temperature protection. This ensures that the rectifier does not suffer from over-temperature and helps to increase the long term reliability of the power supply. The rectifier also has built-in protection against surge, over-voltage, under-voltage and overload.
The D170U25CXPSA1 rectifier is a cost-effective and reliable solution for industrial applications. It has excellent efficiency, high surge and transient voltage protection and also offers longer product life. Due to its low cost, it is widely used in various applications such as motor control, E-lighting, lighting, UPS, etc.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MH10-D170-021 | M/A-Com Tech... | 0.0 $ | 1000 | MINI CONTROLLER EVM |
D170S25CXPSA1 | Infineon Tec... | 163.79 $ | 1000 | DIODE GEN PURP 2.5KV 255A... |
D170U25CXPSA1 | Infineon Tec... | 163.79 $ | 1000 | DIODE GEN PURP 2.5KV 210A... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...