Allicdata Part #: | D1D60K-ND |
Manufacturer Part#: |
D1D60K |
Price: | $ 77.28 |
Product Category: | Relays |
Manufacturer: | Sensata-Crydom |
Short Description: | SOLID STATE RELAY 100 VDC |
More Detail: | Solid State |
DataSheet: | D1D60K Datasheet/PDF |
Quantity: | 1000 |
20 +: | $ 70.25760 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A Solid State Relay (SSR) is an electrical switch used to control the flow of electricity in a circuit. The SSR is composed of a power control circuit and a power control switch, and they operate according to the same principle as a traditional electromechanical relay. The main difference between the two types of relays is that the SSR does not use any physical contact to switch the current on and off, whereas the electromechanical relay uses a physical contact to do the same. The D1D60K is a type of SSR and is used in a variety of applications.
One application for the D1D60K is in motor control. The SSR can be used to control the speed of a motor by regulating both the voltage and the current it receives. This is done by adjusting the power control circuit in the SSR, which controls the amount of current and voltage going to the motor.
Another application of the D1D60K is in temperature control. By controlling the amount of current and voltage sent to a heating element, the D1D60K can be used to regulate the temperature of a system. This is done by adjusting the power control circuit in the SSR, which controls the amount of voltage and current sent to the heating element.
The D1D60K can also be used in lighting control applications. By controlling the amount of current and voltage sent to a light source, the D1D60K can be used to control the brightness and intensity of a light source. This is done by adjusting the power control circuit, which controls the amount of current and voltage sent to the light source.
The D1D60K works by using a power control circuit to control the amount of voltage and current sent to the load. This is done by controlling the current and voltage output of the SSR, which in turn controls the amount of current and voltage sent to the load. When the load requires more current or voltage, the power control circuit increases the output of the SSR, and when the load requires less current or voltage, the power control circuit decreases the output of the SSR.
The D1D60K can be used in a variety of applications, from motor control to temperature control to lighting control. It is an efficient, cost effective way to control the amount of current and voltage going to a load. It is also easy to configure and operate, as it uses a simple power control circuit to control the output.
The specific data is subject to PDF, and the above content is for reference
SSR ZERO SW 480V 16ASolid State
RELAY SSR SPST-NO 20V 4USOPSolid State R...
RELAY DUAL 25A 240V ZC 4-15VDCSolid Stat...
CTRLR TEMP SSR 480V 90A AC OUTSolid Stat...
CTRLR TEMP SSR 240V 90A AC OUTSolid Stat...
RELAY SSR 18A 240VAC AC OUT QCSolid Stat...