D2440-B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays are a type of electronic switch that use a transistor or field-effect transistor to control the flow of electricity. The D2440-B uses a triac solid state relay to switch AC currents up to 25 amps, making them suitable for industrial applications. In addition to their ability to switch high currents, they offer features such as fast switching, long operational life, and low power consumption.

The D2440-B solid state relay consists of a triac, a diode, a capacitive load, and a driver IC. A triac is a three-terminal device that functions as an AC switch. It is essentially two back-to-back thyristors and can be used to control the flow of current in both directions. The diode protects the triac from negative voltage spikes. The capacitive load is used to stabilize the triac by absorbing the voltage transients generated during operation. Finally, the driver IC provides the necessary gate control voltage to the triac.

The D2440-B is a zero-crossing relay which means that it will turn on at the start of the next half-cycle of the AC power supplied to it. This makes it suitable for applications such as controlling motor speed or dimming lights. It can also be used to switch loads on and off rapidly with minimal power losses.

The D2440-B\'s input terminals can be connected either directly to an AC power source, or to an external AC signal designed to signal when the relay should turn on or off. The voltage and current ratings of the D2440-B must be taken into account when connecting external signals as over-current or over-voltage situations can result in damage to the unit. The output terminals of the D2440-B are connected to the device which is being switched. The allowable load current must not exceed the current rating of the relay.

The D2440-B solid state relay is suitable for a wide range of applications such as light dimming and motor speed control. Its features such as fast switching, long operational life, and low power consumption make it ideal for industrial applications. It is also easy to install and use due to its simple design and universal mounting holes.

The specific data is subject to PDF, and the above content is for reference