D2475PG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSR’s) are electrical switches that use semiconductor technology to control the flow of power to a load. The SSR’s most common type is the D2475PG, a dual-channel optically coupled solid state relay. This relay is used to switch two high-voltage loads on and off during the operation of high-powered equipment, the likes of which include heating systems, lighting control circuits, and AC motors.

The D2475PG is composed of two main parts: an input and an output. The input is connected to the external control circuit, which issues signals to the relay to open and close the load connections. The output is connected to the load, which can be current- or voltage-controlled depending on the circuit design. The relay contains an LED on the input side, which projects light to an integrated opto-coupler on the output. The opto-coupler switches the load circuit on or off depending on the amount of light received.

The two main components of the D2475PG are the zero-cross detection circuit and the power semiconductor switch. This type of relay is designed for zero-cross operation, meaning that the load is switched on or off at the point of zero current in the AC supply. This helps reduce the amount of power consumed by the load as it prevents it from turning on or off during the half-cycles of the AC wave.

The power semiconductor switch is the component that carries the load current from the input to the output, and is made of a thyristor or triac. These devices act like an electronic switch and are controlled by a zero-cross detection circuit which triggers the thyristor or triac to switch on or off at the point of zero current. This increases both the reliability and safety of the device.

The D2475PG also contains an optically-coupled photocoupler to isolate the control circuit and the load circuit. This reduces the possibility of damage due to voltage surges and provides electrical isolation between the two circuits. The integrated optical coupler is also designed to be resistant to high interference and is suitable for noisy control and load circuits.

The D2475PG is a robust, reliable, and cost-effective solution for controlling high-voltage loads with a minimum of power consumption. It is designed to provide isolation between external control circuits and the load and is suitable for use in a wide range of applications, including lighting control systems, heating systems, and AC motors.

The specific data is subject to PDF, and the above content is for reference