D2HW-BR211M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

D2HW-BR211M, known as snap action and limit switches that can be used in many applications, are typically used to switch on and off a circuit. Its primary function is to either open or close a circuit, thereby allowing or cutting off the current flow of electricity, depending on the setting of the switch. It’s made of rigid plastic shell, rivet in the middle, metal contact points, and metal spring.

The metal spring is what causes the switch to open and close when pushed. When the metal spring is pushed against the metal contact points, a circuit is created, and electricity is able to flow through the switch. When the metal spring is released from the metal contact points, the circuit is broken, and the electricity is stopped from passing through.

D2HW-BR211M switches typically offer two settings – normally open (NO) and normally closed (NC). Normally open switches will open or disconnect the circuit when current flows, while normally closed switches will close or allow the circuit to function when current is flowing. The switch should be connected to the circuit according to the setting.

In addition, snap action and limit switches can be used in a variety of applications, such as machine controls, human-machine interface (HMI), industrial equipment, and HVAC equipment, among others.

In machine controls, limit switches are used to help monitor the position of the machine and its elements. The switch is connected to a circuit that can be used to control, upon reaching a set point, the motor, motor speed, linear and angular positions, etc. The switches act as an integral part of the controlling system, ensuring the proper function of the system.

Limit switches can also be found in HMI applications and industrial equipment. Human-machine interfaces (HMI) are typically used with switches to enable communication between humans and machines (such as to give a command or to receive information). In industrial equipment, the switching mechanism can be used to monitor the current position of a component, or to power the equipment.

Finally, snap action and limit switches can be found in HVAC equipment, where they are used to either turn on or off a circuit in order to provide cooling/heating. This type of switch is often used in thermostats, as they are able to regulate the temperature within an environment by either turning off or on the current flow.

Overall, D2HW-BR211M switches are well-suited for a wide range of applications, from industrial equipment to HVAC systems. Their snap action mechanism enables them to control a variety of elements, such as allowing or prohibiting the flow of electricity, monitoring the position of a component or machine, and providing cooling/heating operations.

The specific data is subject to PDF, and the above content is for reference