D2MC-01HL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap action switches, such as the D2MC-01HL, are mechanical switching devices that are designed to activate a circuit when a specific, predefined operating position has been reached. While there are numerous variations and configurations, the most common utilizes a plunger that has a larger wheel attached to one end, often called the actuator wheel. When the wheel is pressed or released, the plunger is forced up or down and this forces the other end of the plunger – usually a stationary contact – to make and break the connection in the circuit. This operation opens or closes the circuit, thus activating the desired output.

The D2MC-01HL is a standard snap action switch that has a variety of uses and is commonplace in industry and consumer electronics. The device has an 11mm straight travel and is a single pole, single throw (SPST) switch. It is normally open (NO) and is rated at 2A, 125/250 VAC, making it well-suited to a variety of applications. Common uses include resetting circuits, detecting the opening or closing of doors or windows, and controlling electric motors in household appliances.

In terms of operation, the D2MC-01HL is designed to make contact when the actuator wheel is depressed and breaks contact when it is released. The plunger moves against a spring-loaded mechanism, allowing for consistent and repeatable action. This ensures a clean, reliable switching action and that the circuit is reliably restored to the initial state when the actuator wheel is released. In addition, the device is designed with insulation barriers between its contacts to minimize the risk of electrical shock.

Limiting switches are also snap action switches, but their operation differs significantly from the D2MC-01HL. The purpose of a limit switch is to detect a predetermined position within a particular application and to then activate a circuit. Generally, this is achieved by the switch being connected to a mechanical component, such as a door or window, which causes its actuator wheel to make or break the circuit. The device is commonly used in automated systems, such as robotics and CNC machines, where it is necessary to limit a stroke, detect the opening or closing of an object, or ensure that a component is in the correct position.

The difference between these switches is in their design: while the D2MC-01HL has a plunger that moves in a straight line, a limiting switch has a curved actuator wheel that is designed to detect a specific point. When the wheel makes contact with the predetermined point, the circuit is activated, allowing the device to control the automated system with more accurate precision. This allows for more versatile applications, including location sensing, robot programming and speed control.

Whether it is a snap action switch like the D2MC-01HL or a limit switch, both devices are designed to provide a highly reliable and consistent switching action. Both switches are used in a wide range of applications and provide reliable solutions for circuit management. Ultimately, they provide an efficient and cost-effective way to control a variety of circuits and automated systems.

The specific data is subject to PDF, and the above content is for reference