D3089B99

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Shunts and Jumpers

D3089B99 is a special type of single-pole, double-throw (SPDT) switching device. It is used for high-voltage power supply applications. This type of device is commonly referred to as a "shunt" or "jumper".

A shunt is a type of electrical device that is used to divert current away from a circuit. It is commonly used when a high-voltage power supply is needed. The primary purpose of a shunt is to protect the circuit by allowing current to be diverted away from sensitive components or to allow the current to be redirected to a different circuit.

A jumper is a type of electrical device that is used to redirect the current between two circuits. A jumper allows current to flow from one circuit to another without being diverted through other components in the circuit. Jumpers are commonly used to bypass a switch, resistor, capacitor, or other component in a circuit.

The D3089B99 is a high-voltage power supply device that is designed to provide a voltage range between 0 and 6 volts. This type of device has two input terminals that are connected internally to form a single-pole double-throw (SPDT) switch. The two internal connections of the switch form a “closed” position, allowing the device to direct current to either the load (high voltage) or substitution (low voltage) terminals.

The working principle of the D3089B99 is quite simple. When a voltage is applied to the load terminal, it will close the circuit and allow current to flow to the load. At the same time, the high-voltage power supply will be connected to the substitution terminal. This will allow any current that is redirected from the load to flow to the substitution terminal, bypassing the load.

The D3089B99 is an ideal device for applications where a high voltage power supply is required. By using a shunt or jumper, the circuit will be protected against overloading or damage. The device is also well suited for circuit protection and testing, as it is able to divert current away from sensitive components or to redirect current to a different circuit.

The specific data is subject to PDF, and the above content is for reference