D4840-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

D4840-10 solid state relays (SSRs) rely on modern digital technology to convert electrical signals, typically from a microcontroller, to switch on or off a load in a circuit. Using electronic switching instead of traditional mechanical relays gives these SSRs advantages in terms of accuracy and reliability.

The construction of a D4840-10 SSR generally consists of an input section, an isolator section, and an output section. The input section is where the control signal is provided and is typically driven by a microcontroller or a circuit that provides a suitable voltage and current. This signal is then fed into an isolator section, containing a photoelectric isolator, which separates the input section from the output section of the device. The photoelectric isolator ensures that the circuit is defectively isolated from the mains while in operation. The output section typically consists of a power switch, an exhaustion diode, and a blocking capacitor.

In its simplest form, a D4840-10 SSR is used to turn a load on or off in response to a control signal. The control signal usually comes in the form of a logic signal, for example, 5V or 0V, which can be generated by a microcontroller. When the control signal is applied to the SSR, the power switch in the output section of the device is activated and the load is turned on or off. The control signal is routed through the isolator section of the device, so that the mains side of the circuit is isolated from the control signal, providing an extra layer of safety.

D4840-10 SSRs are used in many different applications where reliable and accurate switching is required. They are often found in process controllers as they provide reliable switching of large loads such as motors and solenoids. They are also used in industrial automation where precise control of electrical functions is required. An example of this is in robotics where SSRs are used to control the motion of electromechanical parts. This type of SSR is also used in other applications such as lighting and home automation.

In addition, D4840-10 SSRs can be used in circuits that require signal isolation. For example, they can be used to provide an isolation barrier between a low level control signal and a high voltage mains signal. This is commonly done in industrial automation where a low level signal from a microcontroller needs to be isolated from the higher voltages of the mains circuit. This provides increased safety in the system and ensures that the control signal is isolated from any electrical influences from the mains circuit.

D4840-10 SSRs represent a simple, reliable, and accurate way to switch large loads on or off as required. They are used in many applications and are versatile enough to be used in a variety of situations. The use of Isolation barriers ensures that control signals remain isolated from the mains circuit, providing increased safety and reliability.

The specific data is subject to PDF, and the above content is for reference