Allicdata Part #: | D56S45CPRXPSA1-ND |
Manufacturer Part#: |
D56S45CPRXPSA1 |
Price: | $ 143.54 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Infineon Technologies |
Short Description: | DIODE RECTFIER FAST 4100V 160A |
More Detail: | Diode |
DataSheet: | D56S45CPRXPSA1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 129.18200 |
Series: | -- |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
D56S45CPRXPSA1 is a diodes component which falls into the category of Single Rectifiers. As with most diodes, the D56S45CPRXPSA1 component is designed to provide a one-directional current flow. This component consists of a diode package with two leads, soldered to a copper plate or another substrate material. It is typically used in a wide range of applications, from switching power supplies to rectifying alternating current(AC) to direct current(DC). Below, the D56S45CPRXPSA1 component\'s application field and working principle will be discussed in more detail.
Application Field
The D56S45CPRXPSA1 component can be used in a number of applications, mainly in low power applications. Its application in these cases is found in areas where minor, intermittent power is required. For example, the component can be used as a rectifier of alternating current in small consumer and automotive electronic devices.
The component can also be used as a switch in lower-power devices and motors, such as a switching power supply. Other use cases include coupling, battery charging, and pulse shaping. In some cases, the D56S45CPRXPSA1 component can even be used in regulated power supplies where the supply requires an input filter to clean up the ripple and noise from the AC side prior to being regulated.
Working Principle
The working principle of a rectifier is quite straightforward: two leads, the anode and the cathode, are exposed to the alternating current, and then the current is forced through the leads in one direction. When the D56S45CPRXPSA1 component is exposed to an alternating current, the anode receives a positive charge and the cathode receives a negative charge. The alternating current is then forced through the leads, resulting in a one-way flow.
The energy saved when the AC current is converted to a DC current is used as a part of a circuit to power electronic devices. The current is guided to the electronic devices and increased in voltage with the help of power regulators. Finally, the necessary power is supplied to the electronic device.
Conclusion
The D56S45CPRXPSA1 component is a single rectifier diode designed for low-power requirements. It is mainly used in applications that require rectification of alternating current, such as switching power supplies and battery charging. Its working principle consists of two leads forced with a positive and negative charge that guides the current through them, resulting in a one-way flow.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
D56S45CXPSA1 | Infineon Tec... | 142.18 $ | 1000 | DIODE GEN PURP 4.5KV 102A... |
D56S45CPRXPSA1 | Infineon Tec... | 143.54 $ | 1000 | DIODE RECTFIER FAST 4100V... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...