DA2J10800L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components that are used to regulate the direction of the current. Rectifiers are devices that convert AC voltage to DC voltage. A single rectifier is a single diode rectifier circuit used to reverse the current - that is, to remove any AC content from the signal and to impedance the flow of DC current. The DA2J10800L is a single rectifier that belongs to the single diode series.

The DA2J10800L is a fast recovery rectifier diode that is designed to minimize reverse recovery time. This diode has a current rating of 800V, a thermal resistance of 2.5k/W, and a reverse current leakage of 100nA max. Its average reverse voltage is 800V and its junction capacitance is 5.3pF.

These diodes are used in a variety of applications, from rectifying power line frequencies to regulating DC current in a high speed application. They are commonly used in switching power supplies, electronic drivers, motor controllers, LED lighting, and other consumer electronic products. Additionally, the DA2J10800L is also used in protection circuits for automotive electronics, home appliances, and industrial systems.

The working principle of the DA2J10800L is based on the properties of a diode. A diode is composed of an anode (positive lead) and a cathode (negative lead). When a voltage is applied, the diode allows current to flow in one direction (from the anode to the cathode), while blocking the reverse current. The reverse voltage must exceed the forward (or trigger) voltage of the diode before allowing current to flow in the reverse direction.

In the case of the DA2J10800L, the reverse voltage is 800V and the forward voltage is 75V. This means that if an 80V signal is sent to the diode, only 5V will be allowed to pass through. If a signal of 805V or more is applied, however, the diode will allow 800V of the signal to flow through.

The fast recovery feature of the DA2J10800L allows for high-speed switching without compromising on efficiency. This is because the device has a low reverse recovery time, which means that when switching from forward to reverse the current is not held up in the device. This allows for faster switching, while still maintaining the efficiency of the device.

In addition to being used as a rectifier, the DA2J10800L can be used as a protection diode. This device can be used to protect circuits against transient voltages and electromagnetic interference (EMI). The fast recovery time of the diode means that it can quickly switch from blocking the reverse current to allowing the reverse current, so that the circuit is not damaged by a large, temporary voltage spike.

The DA2J10800L is a fast recovery rectifier diode and belongs to the single diode series. It is used in a variety of applications ranging from power line rectification to protection circuits and EMI filtering. Its fast recovery feature allows for high-speed switching without compromising on efficiency.

The specific data is subject to PDF, and the above content is for reference