DAC7612UBG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DAC) have been used in a variety of applications for many years, from industrial controls and prototypes to home automation, medical and laboratory equipment. The DAC7612UBG4 is a family of Digital to Analog Converters (DACs) from Texas Instruments and one of its products.

The DAC7612UBG4 is an integrated circuit which enables a digital signal to be converted into an analog signal. It comes with 8 output channels, with each one being capable of producing up to 12 bits of resolution. Each channel also contains a double-buffered latch which keeps the data in a steady state in the event of power interruption.

The DAC7612UBG4 offers multiple power supply configurations, including single, dual and triple supply. It consumes as little as 5.5 mW at a single 5 V supply and as much as 102 mW at a triple supply. The device’s layout is also designed to be in compliance with space-constrained applications.

The device supports the industry-standard SPI™ serial protocol and can handle a data clock rate of up to 16 Mbits/s. It also offers a wide analog output voltage range of up to 6 V with latched outputs ensuring accuracy at power-up and power-down phases.

The DAC7612UBG4 is implemented in most consumer, industrial and medical applications. The device is used to output analog signals such as sound, temperature, load cell readings, multiple sensors, motor speed and position. In consumer applications, it is used to provide visuals and sound from TVs, stereos, and cameras. In industrial applications, it is used to drive electro-mechanical actuators, control analog circuits and provide process control and feedback. In medical applications, it is used for monitoring, imaging and control.

The DAC7612UBG4 converts digital signals into analog signals with its own internal architecture. The analog output channels help to drive the circuitry, which in turn sends current to the intended loads from the power source. Each of the eight output channels contains a resistor ladder network, which is also connected to a single-ended output buffer. This buffer amplifies current and produces the analog voltage.

The DAC7612UBG4 also contains a 12-bit digital-to-analog converter (ADC). The ADC is connected to the output buffer and uses the digital information received over the serial interface to produce the analog voltage required at the output. As the bit resolution of the DAC is 12-bits, the ADC can produce analog signals in steps of 4.9 mV and offers up to 6 volts of analog output range.

The DAC7612UBG4 also offers various levels of protection against power interruption and noise. For example, the double-buffered latches ensure that data is not lost when the supplies are interrupted, and the charge redistribution technique reduces noise on the output.

The DAC7612UBG4 presents many advantages in terms of low noise generated at the output, high output current, wide power supply range and compatibility with the standard SPI serial protocol. The device offers a convenient, low-power and cost-effective solution for the implementation of multiple analog signals in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference