DAC8565IAPWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DAC) are often used in systems that require an analog signal, when an analog signal is not available. One application of the DAC8565IAPWG4 is the production of an analog output when the signal cannot be generated locally. The DAC8565IAPWG4 can convert digital input signal into an analog signal ranging from 0 to 20V with a full-scale accuracy of 16 bit.

The DAC8565IAPWG4 has a wide range of industrial applications and is commonly used in the automotive control, medical equipment, and communications fields. In the automotive control industry, the DAC8565IAPWG4 can be used for fuel injection control and automatic transmission control. In the medical field, it is often used for medical actuators such as linear and electro-thermal actuators, as well as for monitoring vital signs.

The DAC8565IAPWG4 uses conversion technologies such as current-mode and voltage-mode operation in order to support a wide range of digital input signals. The voltage-mode operation on this device allows for the selection of an analog voltage range between 0 and 20V with a full-scale accuracy of 16 bits. By default, the DAC8565IAPWG4 uses Voltage Mode Digital Data Transfer (VMDDT) for efficient data rate which is up to 16 bits per channel with a data rate of 1MHz. The current-mode operation enables the system to reach excellent full-scale accuracy and is used for precision control and accuracy in the range from 0-20V.

The DAC8565IAPWG4 supports a wide range of input logic such as LVDS, LVCMOS, and TTL compatible. The device is programmed using an SPI requiring only a four-wire interface including the SPI clock, chip select, data in, and data out. The device also allows for a low Jitter mode where the SPI Clock can be selected to 50MHz or lower.

The DAC8565IAPWG4 provides differential outputs with two selectable unipolar ranges. For the unipolar operation the DAC8565IAPWG4 will provide a range of 0 to +2V to 0 to +20V. The differential output channels consist of two differential outputs, allowing it to act as a two-channel DAC or a two-input single-output device. The DAC8565IAPWG4 also features a rail-to-rail output stage and has an output impedance of less than 1 ohm providing fast settling time and high accuracy.

The DAC8565IAPWG4 is a highly accurate, low-power Digital to Analog Converters (DAC) with a wide range of industrial applications. It is capable of converting Digital Input Signals into an analog output range of 0 to 20V. The device operates using both Current-Mode and Voltage-Mode operations, supporting Multiple input logic such as LVDS, LVCMOS, and TTL and supports a SPI interface. It also provides a nearly perfect full-scale accuracy with a differential output featuring two selectable unipolar ranges and a rail-to-rail output stage.

The specific data is subject to PDF, and the above content is for reference