DB2S31100L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DB2S31100L is a type of diode rectifier. It is a single-phase, full-wave bridge rectifier. The bridge rectifier is a circuit for converting alternating current (AC) to direct current (DC). It must have four diode elements to form a bridge circuit and the diode are connected in such a way that both the positive and negative cycles of the corresponding half waves of the AC supply are converted into pulsating DC. The primary application of the DB2S31100L is for full wave bridge rectification. In other words, it is used for rectifying and smoothing of AC input power into a DC output power.

The maximum repetitive peak reverse voltage of the DB2S31100L is 100V, with a maximum DC blocking voltage of 110V. The maximum current rating is 1 Amp and its power rating is 2.6W. It also features a fast recovery time of 200 ns. The junction temperature of the diode is 150°C and the storage temperature range is -65°C to 175°C. It is rated for an operating temperature range of -65°C to 150°C.

The DB2S31100L is a high efficiency, reliable and robust device that is suitable for use in high voltage, high frequency inverters, DC converters and motor control applications, like switching power supplies, power DC/DC conversion, and UPS systems. It is also widely used in the fields of telecommunications, medical equipment, computer power supply, audio power amplifier, and other electronic equipment for rectification, smoothing, and harmonic filtering.

The working principle of the DB2S31100L diode rectifier is as follows. When an AC input is applied to the bridge rectifier, the positive section of the input waveform will forward bias diode D1 and D2, while the negative half cycle of the AC waveform will reverse bias the diodes, causing them to block the current. On the other hand, the negative half cycle of the waveform will forward bias D3 and D4, while the positive half cycle of the waveform will reverse bias D3 and D4, causing them to block the current. This switching of diodes allows for the conversion of AC current to DC current, providing full wave bridge rectification.

Moreover, since all the diode elements are in parallel, the current is shared equally between them, and thus, the output current is almost equal to the input current. This makes the DB2S31100L a highly efficient device in terms of power conversion. Additionally, the low forward voltage drop and fast recovery time makes it perfect for high frequency applications.

In summary, the DB2S31100L is a single-phase, full-wave bridge rectifier. It is designed to handle up to 1 Amp of current with a maximum reverse voltage of 100V, and a maximum DC blocking voltage of 110V. It features a fast recovery time of 200 ns, making it suitable for high frequency applications. It is typically used for full wave bridge rectification, rectifying and smoothing of AC input power into DC output power. It is typically used in high voltage, high frequency inverters, DC converters and motor control applications.

The specific data is subject to PDF, and the above content is for reference