DBLS153G C1G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes – Bridge Rectifiers are important components that are used to convert AC to DC, which is in its most basic form called a Rectifier. The DBLS153G C1G is a silicone monolithic bridge rectifier that has been typically used for power, low frequency, general and semiconductor applications.

This bridge rectifier is made up of four, 1.5A, 150V diodes. With a forward current of 1.5A, it also has a forward voltage of 1.2V. The power dissipation of the DBLS153G C1G bridge rectifier is also rated at 2.5W. This is a three-pin device that is soldered directly onto the printed circuit board. The DBLS153G C1G also has a generic number of 1N5399 and a manufacturer part number of MCP1832.

The DBLS153G C1G bridge rectifier is designed to convert AC to DC and is suitable for use in applications such as AC-to-DC rectifiers and power supplies, battery chargers, DC-DC converters, UPS systems, and lighting circuits and appliances. The DBLS153G C1G bridge rectifier is also used in motor control and automotive power applications.

The working principle of a bridge rectifier is based on switching diodes around and using them to create a circuit that allows only unidirectional current to pass and blocks the flow of current in the opposite direction. The bridge rectifier circuit uses four diodes and forms a bridge-like structure. In the bridge circuit, two diodes are connected in series with the source AC voltage, and the other two diodes are connected in parallel with the load resistance.

When the applied AC voltage changes polarity, the diodes switch operation, so that current flows from the AC source to the load. This alternating current is converted into a steady DC current through the bridge rectifier, since the current can only flow in one direction. This prevents a short circuit from occurring.

The DBLS153G C1G bridge rectifier is directly mounted onto the circuit board, eliminating the need for a heatsink. This makes it ideal for power, low frequency and general applications, and ensures that the heat dissipated due to the bridge rectifier is spread out evenly, resulting in reduced power consumption and improved power efficiency.

In conclusion, the DBLS153G C1G bridge rectifier is a versatile power component that is designed to convert AC to DC and is used in applications such as AC-to-DC rectifiers, power supplies, battery chargers, DC-DC converters, UPS systems, and lighting circuits and appliances. It has a forward current of 1.5A and a forward voltage of 1.2V. The working principle of this bridge rectifier is based on four diodes arranged in a bridge-like structure and allowing only unidirectional current to pass. The bridge rectifier is directly mounted onto the printed circuit board, eliminating the need for a separate heatsink.

The specific data is subject to PDF, and the above content is for reference