DBLS102GHRDG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A Bridge Rectifier, also known as a Full Wave Rectifier, is a device used to convert AC into DC power. The bridge rectifier is one of the most commonly used components for transforming AC into DC and is ideal for applications where a DC supply is required. Diodes are a fundamental component of this type of device, and the DBLS102GHRDG is a standard Bridge Rectifier rated up to 2A and 100V.

A Bridge Rectifier is simply an electronic circuit that is used to convert alternating current (AC) that provides an alternating voltage across a load, into direct current (DC). This is often the initial step when converting AC into usable DC power. The DBLS102GHRDG Bridge Rectifier follows this principle and contains four diodes that are wired in such a way as to provide a full-wave rectification.

When dealing with the DBLS102GHRDG, the current passes through four diodes arranged in a bridge formation. AC is applied to the terminal points labeled A and B, while the output is taken across the terminal points labeled Y and Z. When the terminal points labeled A and B have the same polarity (both positive or both negative), no current is output from the device. When A and B have opposite polarities Diodes D1 and D3 conduct, allowing current to flow from A, through D1 and D3, and then to B, before returning again to A.

The device will also operate if a single or multiple AC signal is applied. The output of the Bridge rectifier will be a pulsed DC signal, with the peak value being approximately the same as the AC input. For a sinusoidal input, the output voltage will be equal to the peak-to-peak value of the AC waveform, multiplied by the rectification factor.

The DBLS102GHRDG is used in a range of different applications, including power supplies, AC to DC converters, and even as an alternative method of current measurement. Due to its relatively high current rating and low forward voltage drop, it is well-suited to powering low- voltage devices in medium-power applications.

The DBLS102GHRDG also has a number of safety features. These include its wide operating temperature range, good surge and reverse voltage protection, along with a highly efficient design. The device is also protected against overvoltage and current surges, further improving its safety rating.

In conclusion, the DBLS102GHRDG Bridge Rectifier is a reliable and efficient device for converting AC into DC power. Its robust design makes it well-suited to a range of different applications, from powering low- voltage devices in medium to high-powered applications, to providing current measurement for efficient and safe operation.

The specific data is subject to PDF, and the above content is for reference