DC1300A-C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC1300A-C is a evaluation board that integrates a range of off-line AC and DC power supplies. The board has two DIP switches and a jumper to provide a wide range of operation parameters to achieve a wide range of output voltage, current and efficiency levels. This versatility makes it ideal for development and testing of power supplies and other components.

The DC1300A-C has several operating parameters which can be tweaked to configure the board to the necessary requirements. It has adjustable input voltage, output voltage, output current, and power factor settings. It also contains two DIP switches and a jumper to provide the necessary voltage regulation. It also has a power-on reset feature and fuse protection.

The working principle of the DC1300A-C is based on the conventional principle of DC/DC conversion. To simplify the explanation, this board contains two rectifiers - one for the input voltage and the other one for the output voltage. The input voltage is rectified and regulated to provide a constant DC voltage, and this voltage is then used to power the control circuitry. The output voltage is generated by a DC to DC converter. The converters in the DC1300A-C are discrete type, meaning that they are made of several separate components.

To generate the output voltage, the DC1300A-C uses a boost converter topology. The converter first converts the input voltage to a higher voltage (typically about 4 times) and then uses an inductor and a capacitor to reduce the voltage again to the desired level. This is done using pulse-width modulation (PWM). In PWM, the output voltage is chopped up into be smaller discrete values which can then be regulated by the control circuitry.

The DC1300A-C also has several features to improve the efficiency of the board. The board is capable of synchronizing the PWM waveforms to reduce the switching losses, and it also has a clock-less architecture to avoid unnecessary switching losses that occur when there is a frequency mismatch between the clock and the PWM. It also contains several safety features such as over-voltage and over-current protection.

The DC1300A-C is an ideal platform for development and testing of DC/DC and AC/DC converters. With its adjustable operating parameters, it can be configured to handle a wide range of input and output voltages. It is also quite efficient, thanks to the built-in features. All of these features make it a valuable tool for power supply engineers.

The specific data is subject to PDF, and the above content is for reference