DC1583A-A

Evaluation and Demonstration Boards and Kits are designed to enable product developers and engineers to evaluate and demonstrate the capabilities of various hardware components and systems. This includes devices such as DC1583A-A, which is a 3.3-volt and 5-volt Asynchronous SRAMs that can be used to evaluate and demonstrate the features of the device and demonstrate the possible applications.

The DC1583A-A is packed into a 5mm x 5mm x 0.75mm DFN package with a 64-pin ball-grid array design. It is a low-power device that works at a maximum output frequency of 25MHz and a voltage range of 2.7V to 3.6V and 4.5V to 5.5V, providing an ideal solution for those looking for a high-performance memory solution, with an access time of 45ns at 3.3V and 55ns at 5V.

The core of DC1583A-A is based on the Static Random Access Memory (SRAM) technology, which uses six transistors that operate in parallel to store each bit of data. SRAM is different from other memory technologies, such as DRAM or Flash, in that it does not require a refresh cycles to maintain the stored data. As a result, SRAM offers higher performance and stability than dynamic memory technologies. In addition, SRAM requires slightly less power than dynamic memory and is less susceptible to data corruption due to an interruption in power supply.

The core of the DC1583A-A consists of four SRAM macro-blocks that can be configured to have a capacity of 128K x 64, 256K x 32, 512K x 16, or 1M x 8 and can support read/write operations with page mode capability. The architecture of DC1583A-A was developed to enable low-power operation, while maintaining high-speed access and high reliability. The device supports user-selectable page-mode access times, as well as multiple-port operations and wait-state options. When the device is in idle mode, the power consumption can be reduced significantly by using the IDLE function.

The DC1583A-A can be used for many different applications, such as in embedded systems, graphics cards, wireless applications, automotive systems, industrial automation, and medical devices. The device is free from AI technology, which is a set of technologies designed to provide artificial intelligence (AI) capabilities to the device.

Overall, the DC1583A-A is a useful component for evaluating and demonstrating various hardware components and systems. Its high speed, low power consumption, and AI technology make it an ideal solution for developers and engineers looking to evaluate and demonstrate the capabilities of their hardware products.