DC2085A-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital-to-analog converters (DACs) are important components in most electronic systems as they allow digital signals to be converted into analog signals and can be used to output a specified control voltage or current. The DC2085A-F series of products is a range of evaluation boards designed to help engineers evaluate and test a variety of DACs. This article will provide an overview of the DC2085A-F application field and working principle.

The DC2085A-F range of evaluation boards are designed for applications like industrial automation, scientific instruments, medical equipment and consumer electronics. They can be used to test a variety of DACs such as those used in motor control, voltage and current control, audio signal processing and more.

The DC2085A-F boards are capable of operating in either single- or dual-channel modes. In single-channel mode, the board can handle up to 26 bits of resolution for both unipolar and bipolar ranges, while in dual-channel mode, it can handle 24 bit resolution for bipolar and dual ranges. The board features an on-board MCU which is pre-programmed with an example code for each system or application. This helps to ensure that the data communicated between the MCU and the DAC is accurate and safe, and can be used to test a variety of DACs.

The DC2085A-F board has two channels which can be used to verify the performance of DACs. One channel can be used to output a reference signal while the other channel is used to monitor the output of the DAC. The reference signal is generated by the on-board MCU which reads the digital data from the USB or Ethernet port of the PC, converts it into an analog signal and then outputs it on the RX1 and TX1 output connectors. The signal is then fed to the DAC which converts it into an analog signal that is then supplied to the TX2 output connector.

The DC2085A-F board is capable of a variety of different configurations depending on the specific application requirements. For example, the board can be configured with a 5V, ±12V or ±15V supply. It can also be configured with different clock frequencies and sampling rates. Additionally, it can be configured with various fault diagnosis and system monitoring features.

The DC2085A-F is equipped with a range of test points and connectors which can be used to measure the output of the DAC. These test points can be used to capture the waveform of the output of the DAC, measure the amplitude, frequency and phase of the output signal, measure the linearity of the DAC output, and measure power consumption.

In short, the DC2085A-F evaluation board is an invaluable tool for verifying the performance of DACs in a wide variety of applications. This range of boards has a wide range of available configurations and various test points and connectors for taking accurate measurements. Additionally, it is pre-programmed with example code which ensures accurate data communication and safe operation.

The specific data is subject to PDF, and the above content is for reference