DC415A

DC415A is a evaluation and demonstration board and kit developed by Abracon Corporation to evaluate and demonstrate their parts of Timing Solutions. The DC415A evaluation and demonstration board helps design engineers to develop a prototype faster with accurate timekeeping performance. It provides access to the configuration of the clock with different outputs such as single, differential and spread spectrum. DC415A gives users control to sample and characterize the clock performance under different frequencies.

The DC415A board consists of an external PC, a base board and a host board. The base board contains all the components required for the clock module generation and the host board has various connectors to allow inputting the signal for the clock module generation. It also contains two sets of connectors for the external PC and USB connection. The board also contains several switches and programmable buttons to allow users to control the clock module generation.

The DC415A board can be programmed for different clock outputs and it can be used for both single mode and differential mode clocks. The user can set different output frequencies and voltages of the clock using the programming interface. The board provides access to the clock after connection to the PC. Users can also customize the clock module as per their requirement using the software provided in the package.

The working principle of DC415A board is based on the use of oscillator and counter. An oscillator is used to generate the clock signal with the frequency required. An internal counter then divides the oscillator frequency to get the precise output frequency. The board then uses the divided signal to control the logic within the board. The logic within the board can then be configured to generate the desired output signal.

The DC415A board can also be used to measure the clock signal in the time domain. This helps designers to analyze and assess the performance of the clock module. This makes it easy for designers to find out if the clock module exhibits the desired performance and make the necessary changes to correct the issue. The board also provides monitor and trigger functions to enhance the accuracy of the clock measurement.

DC415A can be used in the development and testing of a wide range of products such as automotive electronics, consumer electronics, medical electronics, etc. It can also be used in industries like telecom, automotive, aerospace, medical, etc. The board can even be used to provide power or other frequency signals for signal processing applications.

The DC415A board has been designed keeping in mind the requirements of timing solutions. It can be used to evaluate and demonstrate different clock outputs, optimize clock module as per the requirement and test the clock performance. It also helps designers to measure the performance of the clock module in the time domain and make sure that it meets all the specified requirements.

DC417B	Linear Techn...	17.68 $	9	DEMO BRD MULTI FOOTPRNT S...
JFD-DC411Y	Sprague-Good...	33.38 $	1000	CAP TRIM 0.7-3/2-3PF 500V...
JFD-DC413Y	Sprague-Good...	33.71 $	1000	CAP TRIM 1-8, 3-8PF 500V ...
JFD-DC414Y	Sprague-Good...	34.04 $	1000	CAP TRIM 1-12/3.5-12PF 50...
JFD-DC416Y	Sprague-Good...	35.86 $	1000	CAP TRIM 1.5-16/4-11PF 50...
JFD-DC419Y	Sprague-Good...	38.87 $	1000	CAP TRIM 2-26/6-28PF 500V...
DC415A	Linear Techn...	119.12 $	2	BOARD DEMO FOR LTC1871EMS...
DC418A	Linear Techn...	107.1 $	1	BOARD EVAL FOR LT1737CSLT...
DC412A	Linear Techn...	107.1 $	2	BOARD EVAL FOR LTC3713EGL...
DC419A	Linear Techn...	53.55 $	2	BOARD EVAL FOR LTC1779ES6...
DC414B	Linear Techn...	119.12 $	2	BOARD DEMO FOR LTC1871EMS...