DCN4-TR4 Allicdata Electronics
Allicdata Part #:

Z7375-ND

Manufacturer Part#:

DCN4-TR4

Price: $ 8.16
Product Category:

Industrial Controls

Manufacturer: Omron Automation and Safety
Short Description: STD. FLAT CBL TRUNK LINE PRESS
More Detail: N/A
DataSheet: DCN4-TR4 datasheetDCN4-TR4 Datasheet/PDF
Quantity: 3
1 +: $ 7.40880
10 +: $ 7.30863
25 +: $ 7.20846
50 +: $ 7.10829
100 +: $ 7.00819
250 +: $ 6.40748
500 +: $ 6.00699
1000 +: $ 5.60652
Stock 3Can Ship Immediately
$ 8.16
Specifications
Series: *
Part Status: Active
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A DCN4-TR4 is a special accessory that connects four telephone lines to a computer. It is essential for establishing direct communication between a computer and a traditional telephone system, enabling users to take advantage of various features such as VoIP and telephony. DCN4-TR4 accessories come bundled with cards and software that provide the necessary drivers for the device to function properly.

There are two main components of the DCN4-TR4 accessory, the board and the card. The board is a circuit board that contains all the components needed to create a connection between the telephone lines and the computer. It also contains the necessary logic for the card to be recognized and used by the computer. The card, meanwhile, has the drivers necessary for the device to function properly.

The first step in setting up the DCN4-TR4 accessory is to install the board into the computer. After the board is installed, it must be connected to the telephone lines. This is done by connecting the board to the computer\'s special communications port and attaching the telephone lines to the board. Once the connection is established, the board will receive a signal from the computer indicating that the connection has been made.

The second part of the setup process involves installing the card. The card contains software that provides the necessary drivers for the board to be recognized by the computer. After the card is installed, the drivers must be activated and the computer must be rebooted to enable the card to be recognized. Once this is done, the computer will be able to connect to the telephone lines and make calls using the DCN4-TR4 accessory.

The DCN4-TR4 accessory also has some additional features. It can be used to record conversations and transfer calls, both incoming and outgoing. It also supports multiple phone lines, allowing calls to be routed to the appropriate numbers. Additionally, it supports fax transmission, allowing documents to be sent over the telephone lines.

These features make the DCN4-TR4 accessory a crucial part of a telephone system. By connecting the traditional telephone system to a computer, users can take advantage of features such as VoIP and telephony, while still maintaining their existing system. It is an invaluable part of any home or office setup.

The specific data is subject to PDF, and the above content is for reference

Related Products
Search Part number : "DCN4" Included word is 9
Part Number Manufacturer Price Quantity Description
DCN4-TR4 Omron Automa... 8.16 $ 3 STD. FLAT CBL TRUNK LINE ...
DCN4-TM4 Omron Automa... 12.15 $ 1 RESISTOR CABLE TERMINATIN...
DCN4-TP4D Omron Automa... 40.61 $ 5 CABLE PWR SUP TERM BLK W/...
DCN4-TB4 Omron Automa... 14.18 $ 4 TERMINAL BLOCK ADAPTER
DCN4-MD4 Omron Automa... 7.12 $ 1000 MULTI-WIRING CONNECTOR8 P...
DCN4-BR4D Omron Automa... 7.99 $ 1000 THIN CABLE-FLAT CABLE CON...
DCN4-BR4 Omron Automa... 8.16 $ 1 STD. FLAT CBL BRANCH LINE...
DCN4-SF4D Omron Automa... 24.0 $ 11 FLAT CABLE CONNECTOR PLUG...
DCN4-MR4 Omron Automa... 7.6 $ 1000 NONUL MULTIDROP FLAT CONN...
Latest Products
24679180

PNEUM ACTUATOR 22MM KEY 2POS

24679180 Allicdata Electronics
993067-4

OK 20 PLC CBL 20 PIN RIBBON

993067-4 Allicdata Electronics
2900933

BRACKET FOR HOUSING IP65

2900933 Allicdata Electronics
E53-CZH03

ACCY COMMUNICATION UNIT RS485

E53-CZH03 Allicdata Electronics
8005201001

RS SD15S UNC 4.4 LP2N INTERFAC

8005201001 Allicdata Electronics
VTP5G

POT 5M PLUG ON MODULE 1-100S

VTP5G Allicdata Electronics