DCP010507DBP-U/7G4

Power (Watts):	1W
Base Part Number:	DCP010507
Control Features:	Enable, Active High
Size / Dimension:	0.78" L x 0.33" W x 0.21" H (19.7mm x 8.3mm x 5.3mm)
Package / Case:	14-SMD Module, 7 Leads, Gull Wing
Mounting Type:	Surface Mount
Efficiency:	81%
Operating Temperature:	-40°C ~ 100°C
Features:	OTP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1kV
Series:	DCP01B
Current - Output (Max):	77mA, 77mA
Voltage - Output 3:	--
Voltage - Output 2:	-6.5V
Voltage - Output 1:	6.5V
Voltage - Input (Max):	5.5V
Voltage - Input (Min):	4.5V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What Is a DC DC Converters?

A DC-DC converter is an electronic device that converts an incoming direct current (DC) signal into a stable or regulated direct current signal at a different voltage level. It is an essential part of modern electronics which can be found in several different forms depending on the application. The most common types are step up (or boost) converters, step down (or buck) converters, and inverters. DC-DC converters provide better control and allow higher frequency operation due to wide bandwidth compared to other DC-AC converters, such as rectifiers.

DCP010507DBP-U/7G4 application field and working principle

The DCP010507DBP-U/7G4 is a step up DC-DC converter designed for a wide range of consumer and general electronics applications. It is a very efficient, open-loop voltage mode PWM DC-DC converter with a wide output range from 0.9V to 10.5V. It has a Quasi-Resonant switching frequency of 1MHz, enabling it to minimize EMI and reduce component size. The low operating current of 75μA makes it very suitable for portable devices. The DCP010507DBP-U/7G4 provides constant or adjustable output voltage regulation. It uses a feedback voltage reference to adjust the internal reference voltage and adjust the output voltage. At start-up, the reference voltage is set to the minimum possible to avoid overshoot. When the output voltage exceeds the desired value, the PWM comparator changes state and turns the switch off until the error goes away and the load regulation is maintained. The DCP010507DBP-U/7G4 is designed for a wide range of applications from general consumer electronics to industrial control applications. It is an ideal solution for applications that require power conversion from 3.3V or 5V supplies to regulated outputs up to 10.5V. Additionally, it can power a wide variety of loads from high current to ultra-low standby current.

Conclusion

The DCP010507DBP-U/7G4 is a highly efficient and versatile DC-DC converter for a wide range of consumer and general electronics applications. Its PWM switching technology and low operating current make it ideal for portable devices, while its ability to provide constant or adjustable output voltage regulation makes it a perfect solution for applications that require power conversion from 3.3V or 5V supplies. Finally, it is designed to reduce EMI and component size while maintaining a high level of performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description