DD400S33KL2CNOSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DD400S33KL2CNOSA1 is a highly efficient and reliable rectifier used for converting alternating current (AC) to direct current (DC). This rectifier consists of four Schottky rectifier diodes connected in a full-wave bridge configuration, providing a total of 400V line-rated reverse-voltage blocking and 33A line-rated forward current. The rectifier is well suited for commercial, industrial and residential applications requiring efficient, high-reliability conversion of AC to DC.

The working principle of the DD400S33KL2CNOSA1 is based on the use of rectifier diodes connected in a bridge configuration to form a rectifying circuit. In this circuit, the AC voltage is applied across the two input terminals of the bridge and then rectified by the four diodes connected in the bridge configuration. When the input voltage rises above the forward voltage drop of the diode, the diode will become forward biased and will conduct current while the input voltage is still rising. When the peak of the input voltage is reached and the diode reaches its peak saturation current, the diode will switch to a reverse bias position and no longer provide any conduction. This cycle repeats with each half cycle of the AC voltage as the voltage swings above and below the zero point.

The DD400S33KL2CNOSA1 is used for a wide range of applications including DC power supplies, uninterruptible power supply (UPS) systems, DC motor drives, server and storage backplanes, load controllers and DC-DC converters. The majority of applications require conversion of AC voltage to a typically low DC voltage. The rectifier is also well suited for applications where high electrical isolation between input and output is needed. The device is particularly useful for applications operating from an AC voltage source of over 600V AC.

The use of Schottky diodes in the DD400S33KL2CNOSA1 rectifier allows for a much higher efficiency than conventional rectifiers while also providing the high level of reliability that is required for a wide range of applications. The four Schottky rectifier diodes connected in a full-wave bridge configuration ensure that the rectifying circuit is always in a fully active state and provide a rectified voltage with minimal voltage drops. Additionally, the use of Schottky rectifiers also allows for switching frequencies and ripple currents that are much lower than what can be achieved with other types of rectifiers.

The DD400S33KL2CNOSA1 rectifier is a reliable and efficient bridge-type rectifier that is well suited for a variety of applications requiring the conversion of AC to DC. Its four Schottky rectifiers provide a total of 400V line-rated reverse-voltage blocking and 33A line-rated forward current for a wide range of applications. The device is also highly efficient due to the low voltage drop provided by the use of Schottky rectifiers and its low switching frequency and ripple current.

The specific data is subject to PDF, and the above content is for reference