DDZ7V5CS-7 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are essential components in electronics since they are used to create paths for current to flow. The DDZ7V5CS-7 is a single Zener diode designed to operate in power circuits. It rectifies AC voltage and protects the circuit from overvoltage.

The single Zener diode is typically used for voltage regulation, protection circuit, or to provide a reference voltage for other components. It consists of a p-type semiconductor and an n-type semiconductor connected together in a single diode. This diode has a breakdown voltage of 7.5 volts, which is the voltage at which the diode begins to break down and conducts a small current. The breakdown voltage is typically set by the manufacturer, and this particular diode can run from 5mA to 1.5A at an ambient temperature of 85 degrees Celsius.

The DDZ7V5CS-7 diode is available in a DO-41 package. The package is insulated and has 0.6mm lead gulling. This means that the leads are designed to be soldered directly to the board, and it will not be exposed to moisture or other environmental conditions. The diode is also designed to dissipate a maximum of 1W of power, making it ideal for power circuits and applications.

The working principle of the DDZ7V5CS-7 is relatively simple. When the device is off, the p-type semiconductor allows current to flow through it, but blocks the flow of current from the n-type semiconductor. When the voltage across the diode rises to the breakdown voltage, a small current starts to flow. This current can then be used to regulate or protect the circuit.

When reverse voltage protection is required, the DDZ7V5CS-7 can be used to ensure that the voltage applied to a circuit does not exceed a certain level. The diode acts like a dam, allowing only a certain amount of current to flow at any given time. This protects the components from damage caused by excessive voltage.

The DDZ7V5CS-7 is also useful for creating a reference voltage for other components of a circuit. By connecting the diode in series with other components, a known voltage can be established that can be used for comparison. This is often used in audio systems, where a precise voltage is needed for the audio signal to sound clear.

The DDZ7V5CS-7 is an ideal choice for power circuits and applications when a precise, safe voltage needs to be regulated. Its small size and low power consumption make it very easy to integrate into any circuit design. It can also be used to protect other components from overloads, and to provide a safe reference voltage.

The specific data is subject to PDF, and the above content is for reference