DF005M-E3/45

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	50V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 1A
Current - Reverse Leakage @ Vr:	5µA @ 50V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-EDIP (0.300", 7.62mm)
Supplier Device Package:	DFM
Base Part Number:	DF005

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Diodes - Bridge Rectifiers

Rectifier diodes are an important component in the operation of many types of devices. They are commonly used in electronics, radio frequency (RF) devices, and semiconductor applications. They are used to convert alternating current (AC) into direct current (DC) power, and also to change the voltage level of a signal. One of the most common types of rectifier diodes is the bridge rectifier (also known as a full wave rectifier). This type of diode, which is shape like a bridge, takes an AC signal and converts it into a DC signal, by allowing current to flow in one direction only.

DF005M-E3/45 Application Field and Working Principle

The DF005M-E3/45 is a bridge rectifier diode, and is characterized by a high surge current of 45 A, a forward current rating of 5 A, and an average forward rectified current of 10 A. The maximum forward voltage drop of the DF005M-E3/45 is 0.5V, which is significantly lower than other bridge rectifier diodes, making it excellent for low voltage applications. The DF005M-E3/45 can be used in a wide range of applications such as DC-DC converters, AC-DC power supplies, battery chargers, LED lighting, and audio suppression. The bridge rectifier operation of the DF005M-E3/45 allows current to flow in only one direction and converts an AC signal into a DC signal, eliminating any oscillations and providing a more steady power supply. When an AC voltage is applied to the four terminals of the DF005M-E3/45 Bridge Rectifier, a pulsating direct current will be produced. During the positive half cycle, diodes D1 and D3 conduct in a forward biased manner, and this causes the current to flow from Cathode to Anode. During the negative half cycle, the diodes D2 and D4 conduct as they are in a forward biased manner, and this causes the current to flow from Cathode to Anode. Thus, the current is allowed to flow in one direction only. The main advantages of the DF005M-E3/45 Bridge Rectifier are the low forward voltage drop, the high surge current, and the fast reverse recovery time. The DF005M-E3/45 also has high reliability and an excellent temperature range which makes it suitable for a wide range of applications.

Conclusion

The DF005M-E3/45 Bridge Rectifier is a popular component in many electronics, radio frequency (RF) devices, and semiconductor applications. It has a low forward voltage drop, a high surge current rating, and a fast reverse recovery time which make it excellent for low voltage applications. The diode allows current to flow in one direction only and converts an AC signal into a DC signal, eliminating any oscillations and providing a more steady power supply. With its high reliability, excellent temperature range, and wide range of applications, the DF005M-E3/45 is an ideal solution for a variety of power management needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description