DF11-14DS-2DSA(05)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DF11-14DS-2DSA(05) is a type of common rectangular connector. It is a male plug with 2mm pitch and is referred to as a \'header\', \'receptacle\' or \'female socket\'.

A rectangular connector is a connection interface commonly used in electronic equipment, industrial automation and telecommunications applications. However, the same type of connector is used in many other areas, including audio/visual, computers, medical equipment, and military applications.

This type of rectangular connectors is mainly used to connect two wires, cables or components within a circuit. It can also be used as a connection point between a component and a printed circuit board to create a circuit path or circuit board for external connections. As connectors are exposed to the environment, care should be taken that they do not come into contact with moisture or other particles.

The DF11-14DS-2DSA(05) rectangular connector is a 2mm male pin header that comes with two rows of four pins and two rows of three pins. It is commonly used to connect devices or components in a circuit board or device. The pins are usually soldered to the board or connected to a wire, and then the header is mated with a female socket. The two rows of four pins are used to provide power and grounding; while the two rows of three pins are used to give signal transmission.

DF11-14DS-2DSA(05) rectangular connectors are made from ABS plastic and are capable of a high level of switching performance at an input voltage of 5.0V DC. It has an insertion force range of 0.8-3.0 Newton and can support a maximum current of 0.5A. The rated temperature for the product is -36oC to +100oC. The product is rated for 1000 mating cycles and is RoHS compliant.

It is important to verify the compatibility of the parts when installing the DF11-14DS-2DSA(05) rectangular connector. The mating part should be compatible with the mating socket, as otherwise it may cause a short circuit. To ensure electrical contact is made, it is recommended that mating pins be used on the mating side.

In summary, the DF11-14DS-2DSA(05) rectangular connector is a type of 2mm male pin head with two rows of four pins and two rows of three pins. It is primarily used to connect devices or components within a circuit board and is capable of high levels of performance and is rated for 1000 mating cycles. It is important to make sure that the parts used are compatible with the connectors to ensure proper electrical contact.

The specific data is subject to PDF, and the above content is for reference