DFE252010P-1R2M=P2

DC Resistance (DCR):	68 mOhm Max
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Supplier Device Package:	1008 (2520 Metric)
Package / Case:	1008 (2520 Metric)
Mounting Type:	Surface Mount
Inductance Frequency - Test:	1MHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	DFE252010P
Shielding:	Shielded
Current - Saturation:	--
Current Rating:	3.2A
Tolerance:	±20%
Inductance:	1.2µH
Material - Core:	Iron Powder
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IPC252010P-1R2M=P2 Application Field andWorking Principle

Fixed inductors, such as IPC252010P-1R2M=P2, are electrical components primarily used for filtering, timing, and energy storage in electronic circuits. Fixed inductors are also known as chokes or coils, and can be found in a variety of sizes and shapes as well as different materials and construction styles.In order to understand how a IPC252010P-1R2M=P2 works, it\'s important to know about the way inductors work in general. An inductor is a passive two-terminal electrical component that stores energy in a magnetic field when current passes through it. The energy is stored in the form of a magnetic field that is created when current passes through the inductor\'s conductive wire coil.IPC252010P-1R2M=P2s are composed of a core, windings and a case, and is designed to provide an inductance of 1.2mH with an inductance tolerance of ±10%. The core is the material which forms the center of the inductor, providing flux for the magnetic field. The winding is a copper wire, wrapped many times around the core, which forms a number of turns, and is responsible for the flow of current through the device. The case is an enclosure which protects the winding from environmental influences.IPC252010P-1R2M=P2 is typically used for various applications that require inductors for energy storage, filtering and timing. These applications can range from high-frequency circuits, switch-mode power supplies, and power amplifiers, to power lines, automobile ignition systems and AC/DC converters. These components can also be used for various circuit protection configurations, such as over-voltage and over-current, as well as voltage regulation and EMI/RFI filtering.In a power switching application, an inductor is used in conjunction with other components, such as diodes, capacitors, and resistors, to store energy and control the current flow through the circuit. The inductors purpose is to prevent the voltage from rising too quickly or too sharply as current flows through the circuit, which is referred to as "ringing" or "inductance resonance". The inductor also prevents unwanted currents from finding their way into the device or system, by producing a more linear current throughout the circuit.IPC252010P-1R2M=P2s can also be used in power supplies and regulators to dampen oscillation. Oscillations occur when the input voltage and output voltage do not match and cause the circuit to produce an alternating current. By using an inductor, the circuit\'s output can be dampened by preventing the voltage from rising or falling too quickly, thus preventing unwanted oscillations.EMI/RFI filtering is another application of the IPC252010P-1R2M=P2 inductor. EMI/RFI is caused by unwanted electrical signals that interfere with the desired signal. An inductor can act as a filter, by blocking these signals and allowing the desired signal to be transmitted through the circuit.IPC252010P-1R2M=P2 inductors are used in automotive applications as well, such as the ignition system. By using an inductor in conjunction with a spark plug and other related components, the ignition system is able to create a spark that will ignite the fuel in the engine.Finally, IPC252010P-1R2M=P2 inductors are used in applications such as AC/DC converters. AC/DC converters are used to convert the AC power from the main power supply to a DC output. The inductor is used in this applications in order to smooth out the DC voltage, so that it can be used for applications such as battery charging and other DC powered devices.Fixed inductors, such as the IPC252010P-1R2M=P2, are very common components found in a wide variety of applications. These components are essential for filtering, timing, and energy storage, and can be found in many electronic and automotive applications. Understanding the construction, workings, and applications of the IPC252010P-1R2M=P2 inductor will help you to better understand the various uses of this versatile component.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description