DFEG10040D-3R3M=P3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components used to store energy and control the flow of current in electronic circuits. These devices can be used for a range of applications, such as in mobile communication base stations, power supplies, control systems and medical diagnostics. The DFEG10040D-3R3M=P3 fixed inductor is an ideal choice for these types of applications due to its high performance and reliable operation.

The DFEG10040D-3R3M=P3 fixed inductor is an inductance device which consists of a core and two coils. The core material used in the inductor is ferrite, which is a type of permanent magnet that has a high permeability and low electrical resistance. This combination allows for a highly efficient operation. The two coils are wound around the core in opposite directions, forming a secondary loop which is used to generate and store energy. The two coils can be connected in series or in parallel, depending on the application.

The inductance of the DFEG10040D-3R3M=P3 fixed inductor is determined by the number of turns of the coils, the types of materials used and the size of the core. A higher number of turns increases the inductance, while a smaller core size reduces the inductance. The inductor also has a rated inductance value which needs to be taken into account when selecting the device. This value is usually specified on the datasheet, and varies depending on the number of turns and core size.

The DFEG10040D-3R3M=P3 fixed inductor has a high frequency response and low loss at high frequencies. This is due to the low resistance of the ferrite core which allows for better signal transmission. The inductor also has a high shielding effect and tolerance to electromagnetic interference, making it suitable for use in noisy environments. Other features include a high temperature stability, high voltage breakdown capability and low leakage current.

In terms of working principle, fixed inductors store energy in a magnetic field created by the current flowing through the coils. This energy is released when the current is suddenly reduced or reversed. This allows the device to act as a filter, blocking unwanted frequencies and only allowing the desired frequencies to pass through. The inductance of the device also determines the impedance of the circuit, which is used to control the flow of current.

The DFEG10040D-3R3M=P3 fixed inductor is an ideal choice for a variety of applications, such as power supplies, motor control systems and medical equipment. Due to its high performance and reliable operation, it is suitable for high-frequency and high-voltage applications. The device is relatively inexpensive and widely available on the market, making it an ideal solution for any design engineer.

The specific data is subject to PDF, and the above content is for reference