DFEG12060D-4R7M=P3

DC Resistance (DCR):	11 mOhm Max
Height - Seated (Max):	0.236" (6.00mm)
Size / Dimension:	0.512" L x 0.496" W (13.00mm x 12.60mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	AEC-Q200
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	DFEG12060D
Shielding:	Shielded
Current - Saturation:	14A
Current Rating:	10A
Tolerance:	±20%
Inductance:	4.7µH
Material - Core:	Iron Powder
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors provide a steady flow of current regardless of the voltage or power. They are usually used to filter out high frequency signals, provide power amplifying, or as an oscillating circuit. The DFEG12060D-4R7M=P3 is an example of a fixed inductor that is used in a variety of projects and applications.The DFEG12060D-4R7M=P3 fixed inductor is a surface-mount inductor with a rated current of 1.0 A, a inductance of 4.7 uH (at 100 kHz, 0.1 A), and a DC resistance of 0.108 ohms. It has a rated peak current of 1.5 A and a typical Q factor between 40 and 150. This inductor is made of a mixture of iron powder and ferrite core material with a protective glossy black epoxy case. The DFEG12060D-4R7M=P3 fixed inductor has several applications. It is commonly used to filter out high frequency signals, provide power amplifying, or as an oscillating circuit. It is also widely used in power supplies, audio systems, antennas, and radio frequency (RF) applications. It can be used in switching power supplies to filter out electronic interferences and reduce noise levels in audio systems. It can also be used in antennas to limit the current at higher frequencies.The working principle of the DFEG12060D-4R7M=P3 fixed inductor is fairly straightforward. Whenever a flow of current passes through an inductor, it causes a magnetic field to build up around the inductor. This magnetic field, in turn, induces a voltage which opposes the flow of current. As a result, the current through the inductor is limited or “fixed.” Thus, the inductor is able to filter out higher frequency signals and provide power amplifying. The working performance of the DFEG12060D-4R7M=P3 fixed inductor can be measured in different ways. Its Inductance, Resistance, and Quality Factor (Q-factor) are among the most important parameters. The Inductance is a measure of the magnetic flux produced by a unit current, and is expressed in Henries (H). It is calculated by dividing the voltage across the inductor by the rate of change of the current through it. The Resistance is a measure of the opposition to the current flow. It is expressed in Ohms (Ω). The Quality Factor is a measure of the efficiency of the inductor at a particular frequency. The higher the Q-factor, the more efficient the inductor is at that frequency.Overall, the DFEG12060D-4R7M=P3 fixed inductor is an efficient and versatile device that can be used in a wide range of applications. It is able to provide a steady current flow and filter out higher frequency signals. Its Inductance, Resistance, and Quality Factor (Q-factor) can be used to measure its performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description