DFL1504S-E3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DFL1504S-E3/45 is a Member of the Diodes Bridge Rectifiers family. It is a 4A, 400V/800V, Single-Phase full-wave bridge rectifier with a high surge current specification; ideal for electromechanical and electrical applications. It provides a very efficient and reliable method of converting AC voltage to DC voltage.

Applications

The DFL1504S-E3/45 is designed for use in switch-mode power supplies, AC-DC rectifiers, DC-DC converters, motor control circuits and many other industrial and consumer applications. Its features include a low-loss, thermal resistance package with a high current rating and its low forward voltage drop. The rectifier also provides maximum current rating capabilities and various overcurrent protection devices. These features make it ideal for use in a wide range of consumer and commercial applications.

Working Principle

The DFL1504S-E3/45 is a four-pin, surface mounted bridge rectifier built around four diodes that bridge the two halves of the alternating current being supplied. The diode is connected between the two halves of the AC supply. The forward bias in the diode allows current to pass from negative to positive and the reverse bias blocks current from passing from positive to negative. This is how the device converts AC to DC.

In operation, the device provides four pins in a single package. The pin arrangement of the device is the same as a diode bridge rectifier. The pins on the bottom comprise two inputs and two outputs. The input pins are connected to the AC supply; the outputs are connected to the DC load.

The output of the device is a full-wave rectified signal. This signal is produced when the positive input of the device is greater than the negative input of the device. When the output is high it turns the device on and produces current which is passed through the load. During the negative half of the alternating current the output of the device is low, turning the device off and no current is passed through the load.

This full-wave rectification of the track ensures maximum efficiency from the device, resulting in a high current rating and very low forward voltage drop. This makes it an ideal choice for use in a variety of applications, from consumer electronics to industrial control and motor control.

Conclusion

The DFL1504S-E3/45 is a very efficient and reliable member of the Diodes Bridge Rectifiers family. It provides a low-loss, thermal resistant package and a high current rating which makes it ideal for a wide range of applications. The device also features a low forward voltage drop and various overcurrent protection devices. It is designed to convert AC voltage to DC voltage resulting in maximum efficiency from the device.

The specific data is subject to PDF, and the above content is for reference