DFL1506S-E3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, also known as rectifiers, are electronic components that convert alternating current (AC) electricity into direct current (DC) electricity. The DFL1506S-E3/45 is a type of bridge rectifier diode that is specifically designed to provide high-reliability performance. In this article, we will explore the application field and working principle of the DFL1506S-E3/45.

The DFL1506S-E3/45 is a relatively small bridge rectifier diode, measuring only 15x6mm. The diode has an ultra-high impedance, which makes it well-suited for use in applications where electrical noise suppression is important, such as motor speed controllers. Additionally, the diode has a low forward voltage drop of only 0.60V, which makes it suitable for high-efficiency applications. The diode can also handle large transient inrush current of up to 12A, making it suitable for dealing with large power surges.

The DFL1506S-E3/45 is typically used in electronic circuits to convert alternating current (AC) to direct current (DC), a process known as rectification. In order to do this, the diode is connected in series with two or more DC sources or two AC sources. Each AC source then has its own dual contact “hot” pin which is connected to one of the two output sources. The DFL1506S-E3/45 is then used to control the flow of current from one of the two sources to the other. This is called a bridge rectification and is used to convert AC to DC.

The DFL1506S-E3/45 works by allowing current to flow through the diode in one direction only. This is accomplished by the use of a P-type semiconductor, which acts as an insulator when a positive voltage is applied to the anode and a N-type semiconductor, which acts as an insulator when a negative voltage is applied to the cathode. When a DC voltage is applied to the anode, the P-type semiconductor creates a barrier that prevents current from flowing through the diode in the opposite direction. This prevents any unwanted current flow, meaning that only current flowing in the direction of the applied DC voltage can pass through the diode.

In addition to rectification, the DFL1506S-E3/45 is also used for reverse-voltage protection and as ESD protection. When a reverse voltage is applied to the diode, the P-type semiconductor blocks current flow, preventing any damage from occurring. The diode is also equipped with an ESD protection diode, which is designed to protect delicate circuits from electrical surge damage.

The DFL1506S-E3/45 is a high-reliability bridge rectifier diode that is well-suited for applications requiring electrical noise suppression, high efficiency, and surge protection. The diode is designed to convert AC to DC and it is equipped with reverse polarity and ESD protection. While not the largest or most powerful bridge rectifier diode available, the DFL1506S-E3/45 is ideal for most general electronics applications, making it a popular choice among engineers and hobbyists alike.

The specific data is subject to PDF, and the above content is for reference