Allicdata Part #: | 374-1323-ND |
Manufacturer Part#: |
DIL05-2C90-63L |
Price: | $ 14.62 |
Product Category: | Relays |
Manufacturer: | Standex-Meder Electronics |
Short Description: | RELAY REED DPDT 250MA 5V |
More Detail: | N/A |
DataSheet: | DIL05-2C90-63L Datasheet/PDF |
Quantity: | 49 |
1 +: | $ 13.29300 |
10 +: | $ 12.62840 |
25 +: | $ 11.96370 |
50 +: | $ 11.29910 |
100 +: | $ 10.63440 |
250 +: | $ 9.96975 |
500 +: | $ 9.30510 |
Turn Off Voltage (Min): | 0.75 VDC |
Coil Resistance: | 150 Ohms |
Coil Power: | 167 mW |
Contact Material: | -- |
Operating Temperature: | -20°C ~ 70°C |
Termination Style: | PC Pin |
Mounting Type: | Through Hole |
Features: | Sealed - Fully |
Release Time: | 1.5ms |
Operate Time: | 0.7ms |
Series: | DIL |
Turn On Voltage (Max): | 3.5 VDC |
Switching Voltage: | 175VAC, 175VDC - Max |
Contact Rating (Current): | 250mA |
Contact Form: | DPDT (2 Form C) |
Coil Voltage: | 5VDC |
Coil Current: | 33.4mA |
Coil Type: | Non Latching |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Reed relays are components of electronic devices that are used to switch one circuit to another. This switching is done with the help of a magnetic field. The DIL05-2C90-63L Reed Relay is a type of General Purpose Low Level Solid State Relay that is used to control a variety of electronic applications. This relay has a maximum load current of 2A and can be used in a wide range of load operations, such as DC voltage switching, on/off load control, and other power switching applications.
The DIL05-2C90-63L Reed Relay is composed of a single-coil and a pair of ferromagnetic reeds. It is typically used in devices such as light dimmers, motor controllers, and power regulators. The reed relay has an arm shaped contactor which consists of two ferromagnetic reeds.The reeds in the relay act as a single switch when a current is fed through the coil. When a current is fed through the coil, a magnetic field is generated which acts upon the reeds, causing them to move together and create a switch-like action.
The main application field of the DIL05-2C90-63L Reed Relay is in AC and DC switching applications. This relay can be used in applications such as motor control, lighting control, and DC and AC load switching. The DIL05-2C90-63L Reed Relay can also be used in ground fault protection circuits and Level IV ground fault interrupters. It is suitable for motor start and stop applications, voltage detection, and temperature protection.
The working principle of the DIL05-2C90-63L Reed Relay is simple and straightforward. When current runs through the coil, it generates a magnetic field which causes the reeds to move. The reeds close the circuit when the current is fed and the polarity is correct. The contacts then act like a switch, allowing current to flow through the circuit. The connected switching contact points then determine the direction of current flow in the circuit.
In conclusion, the DIL05-2C90-63L Reed Relay is an ideal choice for applications that require low voltage and low power switching. It can be used to control a range of applications, such as light dimmers, motor controllers, and power regulators, and is suitable for ac and dc switching applications. The simplicity of the working principle makes it easy to install and use.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
DIL05-2C90-63L | Standex-Mede... | 14.62 $ | 49 | RELAY REED DPDT 250MA 5V |
RELAY REED SPST 1A 5V
RELAY REED SPST 500MA 24V
RELAY REED DPST 500MA 24V
RELAY REED 3PST 250MA 5V
RELAY REED SPST 500MA 24V
RELAY REED SPST 1A 24V UL