DK603 Industrial Controls

Output Type:	--
Weight:	0.72 oz (20.41g)
Operating Temperature:	0°C ~ 50°C
Features:	Bezel Sold Separately
Ingress Protection:	--
Termination Style:	PC Pin
Mounting Type:	Panel Mount - Window
Panel Cutout Dimensions:	Rectangular - 52.10mm x 20.60mm
Voltage - Supply:	5VDC
Series:	DK600
Display Characters - Height:	0.560" (14.20mm)
Number of Characters Per Row:	3.5
Display Type:	LED - Green Characters
Measuring Range:	±20VDC
Type:	Voltage (Voltmeter)
Lead Free Status / RoHS Status:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DK603 is a type of panel meter, which is used to measure electrical quantities such as voltage, current, temperature and power. It is designed to be user-friendly and cost-effective, minimizing the amount of time and energy spent on calibration. This type of panel meters is applicable in a variety of fields, including industrial, commercial, and residential applications.

Application Fields

DK603 panel meters are applicable in a variety of fields. In industrial applications, they are used for the measurement and monitoring of power, voltage, and current, as well as for the calculation of power factor. These meters are also used in residential and commercial buildings for monitoring and controlling energy consumption. In addition, DK603 panel meters can be used for temperature monitoring and control, and for metering of water, gas, and other fluids.

Working Principle

DK603 panel meters are based on a variety of techniques, such as resistive and inductive measurement, eddy current measurement, and Hall effect measurement. In resistive and inductive measurement, the meter is connected to the line or circuit being measured. The current in the line produces a magnetic field, which is detected by the meter and used to calculate the current. In eddy current measurement, an alternating current is applied to the coil in the meter, which creates an alternating field. The field strength is proportional to the current being measured. In Hall effect measurement, a permanent magnet is used to create a field, which is then detected by the meter. The field strength is proportional to the current being measured.

Calibration

DK603 panel meters need to be calibrated before use, to ensure accurate measurement. Calibration can be done manually or using an automated calibration system. For manual calibration, the panel meter must be connected to the line or circuit being measured. The current in the line or circuit is then adjusted until the meter reads the desired value. Automated calibration systems use a variety of techniques to ensure accuracy, such as testing signals at different frequencies, and checking the accuracy of the meter against a reference signal.

Conclusion

DK603 panel meters are used in a variety of applications, including industrial, commercial, and residential. They are based on a variety of techniques, such as resistive and inductive measurement, eddy current measurement, and Hall effect measurement. Calibration of the meters is essential to ensure accuracy and reliable measurements.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description