DL914

The DL914 is a type of single diode rectifier. This type of rectifier uses diode action to convert AC current to DC current. It is an essential component for power conversion and electrical energy storage applications. This article will discuss the application field and working principle of the DL914.The DL914 is a diode rectifier used to rectify alternating current (AC) into direct current (DC). It is often used in electrical power supplies to convert AC power to DC power. The device is designed to rectify current at high efficiency with minimal power loss. It is also used in voltage stabilizers, high-frequency demodulators, and other audio and radio frequency circuits.The DL914 has three basic configurations: a single diode rectifier, a schottky diode rectifier, and a bridge rectifier. The single diode rectifier configuration is the simplest and most commonly used. In this configuration, a single diode is connected in series with the AC power source. During alternating current operation, the diode allows current flow in one direction only. This allows the DC output of the rectifier to be direct current.The schottky diode rectifier configuration is similar to the single diode configuration, but it consists of two diodes connected in opposite directions. This configuration allows the DC output to be more accurately regulated compared to the single diode rectifier.The bridge rectifier configuration consists of four diodes arranged in three orthogonal planes. During certain parts of the AC waveform, the four diodes act together to convert AC current to DC current. This configuration has the advantage of providing a higher power output than the single diode rectifier and better regulation than the schottky diode rectifier.The DL914 is a 7.5 amps, 600 volts diode rectifier, capable of withstanding short-term overloads of up to 1000 volts. It can be used in power circuits up to 20 kHz and over temperature regimes of up to 150°C. The device is made from a compound semi-conductor material consisting of Germanium, Silicon and Zinc, which ensures high performance and reliability.The DL914 is available in both axial and surface mounted packages. It is fairly easy to install, and standard screwdriver connectors are all that is required.The working principle of the DL914 is based on the fact that diodes only conduct current in one direction. When connected in series with an AC power source, the diode will only allow current to flow when the voltage across it is positive. This ensures that only a DC current will flow in the circuit.In summary, the DL914 is a type of single diode rectifier commonly used in power supplies, voltage stabilizers, and audio and radio frequency circuits. It is made from a compound semi-conductor material and is capable of managing current up to 7.5 amps and voltage up to 600 volts. The DL914 can also be used in temperatures up to 150°C and with frequencies up to 20 kHz. Its working principle is based on the fact that diodes only allow current to flow in a single direction.

ADI-DL9160660	Omron Automa...	0.69 $	1000	RED LED DOMELIGHTLED Ligh...
ADI-DL9160-RGB	Omron Automa...	1.39 $	1000	LED DIF LT 226MM RGBLED L...
DL914	Micro Commer...	0.04 $	1000	DIODE GP 75V 150MA MINI M...