Allicdata Part #: | 442-1161-ND |
Manufacturer Part#: |
DLH-L30G-E1BD-C-NAV8 |
Price: | $ 29.11 |
Product Category: | Sensors, Transducers |
Manufacturer: | All Sensors Corporation |
Short Description: | SENSOR PRESSURE 30" H2O 18 BIT R |
More Detail: | Pressure Sensor 1.08 PSI (7.48 kPa) Differential/V... |
DataSheet: | DLH-L30G-E1BD-C-NAV8 Datasheet/PDF |
Quantity: | 7 |
1 +: | $ 26.46000 |
5 +: | $ 25.25670 |
10 +: | $ 22.85070 |
25 +: | $ 21.04680 |
50 +: | $ 18.64140 |
100 +: | $ 18.04010 |
Series: | DLH |
Part Status: | Active |
Pressure Type: | Differential/Vented Gauge |
Operating Pressure: | 1.08 PSI (7.48 kPa) |
Output Type: | I²C, SPI |
Output: | 16b |
Accuracy: | ±1.5% |
Voltage - Supply: | 1.68 V ~ 3.6 V |
Port Size: | Male - 0.09" (2.24mm) Tube, Dual |
Port Style: | Barbed |
Features: | Temperature Compensated |
Termination Style: | PC Pin |
Maximum Pressure: | 7.23 PSI (49.83 kPa) |
Operating Temperature: | -25°C ~ 85°C |
Package / Case: | 8-DIP (0.620", 15.75mm), Dual Ports, Same Side |
Supplier Device Package: | 8-DIP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Pressure sensors and transducers are commonly used to measure physical properties like pressure, temperature, and acceleration in industrial industries and applications. Among them, DLH-L30G-E1BD-C-NAV8 is a widely used pressure transducer used in a variety of industries.
DLH-L30G-E1BD-C-NAV8 pressure transducer is a device that converts pressure measurements into electrical signals. It consists of two parts: a sensing element, which detects the changes in pressure, and electronic conversion circuitry, which converts the measured pressure into electrical signal. The DLH-L30G-E1BD-C-NAV8 can measure the pressure over a range of 0 to 30 bar. The output signal of the transducer is a 4-20 mA two wire loop.
DLH-L30G-E1BD-C-NAV8 pressure transducer is suitable for use in a wide range of applications. It is commonly used for controlling and monitoring pressure in industrial processes, such as gas or oil exploration, chemical processing, water treatment, and for measuring liquid and gas flow. The transducer also has wide application in automotive systems, for monitoring engine temperature, oil level, and other such parameters. DLH-L30G-E1BD-C-NAV8 is also used in aerospace and medical applications, for measuring air pressure for aircrafts and oxygen levels for medical patients.
The working principle of DLH-L30G-E1BD-C-NAV8 pressure transducer is based on the principle of a strain gauge. A strain gauge is basically a resistor that changes its resistance when it is subjected to a mechanical force. The transducer consists of a strain gauge mounted on a diaphragm. The diaphragm is connected to a measuring chamber or a vessel, which is subjected to a pressure. The strain gauge senses the pressure changes in the measuring chamber due to the pressure applied, and converts it into an electrical signal.
DLH-L30G-E1BD-C-NAV8 pressure transducer is designed for high accuracy and reliability. It features an SS316L construction and has a 25 micron resolution. The transducer is resistant to temperatures up to 150°C, making it suitable for use in high temperature applications. It is also corrosion resistant, and has a long service life of up to 50 million cycles. The transducer is also available with a range of optional features, such as pressure switches, remote logging software, digital display, and other features.
DLH-L30G-E1BD-C-NAV8 is a reliable, accurate, and cost effective pressure transducer which can be used in a variety of applications. It is easy to install and maintain, making it suitable for both industrial and commercial applications.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...