DM74ALS1032AMX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DM74ALS1032AMX (Octal Buffer/Line Driver With 3-State Outputs) is a logic element belonging to the category of Logic - Gates and Inverters. It consists of a number of buffer/line drivers with 3-state outputs capable of providing isolation between a variety of logic systems. The DM74ALS1032AMX is used in applications such as signal isolation, line driven to drive bus lines connected to numerous peripherals, or drive multiple loads and line receivers in the same application. The DM74ALS1032AMX consist of eight high-impedance line drivers with open-collector output transistors. It also contains eight buffers designed with three-state output circuits. This design offers high sourcing and sink currents for device loading operations. The internal logic is organized in a hierarchical structure providing isolation from the signal side (outputs) from the power side (VCC and GND).

The buffer/line driver of theDM74ALS1032AMX was designed to have flexible configuration options. It can be used as a single 8-bit latch, a double 4-bit latch, or as separate single bit latches. The device can be easily daisy-chained for applications with more than 8-bits of data. It also supports additional logic functions such as logic \'AND\', \'OR\' and \'INVERT\'. It also has an open collector output.

The main function of the DM74ALS1032AMX is to buffer or amplify an input signal (‘1’ or ‘0’) and convert it into an output that can be used by other logic elements. The input signal is applied through 8-inputs (A0-A7). Then the buffer/line driver checks the input to see if all the inputs are equivalent. If they are equal, then the output state ‘0’ or ‘1’ (or three-state in case of open-collector) is decided by the corresponding output for the input port.

The device provides 8 outputs (Y0-Y7), all equipped with three-state outputs that can be used for converting logic states to output states. Each output transistor acts as an open-collector, enabling the current to flow in the output when the transistor is “off” and prevent current from flowing when the transistor is “on”.

The device requires a single power and ground pin (VCC and GND). The power input and ground are used to provide necessary power requirements to the device, while the output pins are connected to the logic elements or peripheral devices. The logic output has programmable delays that can be set by changing the external logic or by reducing the internal drive of the output transistors.

In addition to their buffering function, the DM74ALS1032AMX can be used to construct logic blocks like logic gates and multiplexers. These logic blocks are used to perform logic functions such as AND, OR and INVERT. The device also provides flip-flop storage for small series of operations. The flip-flop storage eliminates the need for a system to remember the current level of signal without erasing its history.

The DM74ALS1032AMX is a simple device capable of providing signal isolation, output buffering, input/output multiplexing, and logic operations. It is organized in a hierarchical structure providing isolation from the signal side from the power side. The device is used in applications such as driving bus lines connected to multiple peripherals, signal isolation and line drivers, output buffering and logic operations.

The specific data is subject to PDF, and the above content is for reference