DM74ALS174MX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip-flops are a type of sequential logic circuit commonly used for memory, monitoring and storing state information. The DM74ALS174MX is one type of logic flip-flop circuit. It is a high-speed, low-power CMOS logic circuit containing two master-slave edge-triggered flip-flops. It is a hex-inverters and bistable latches that can be used as either a single set-reset latch or as a pair of latches.

The DM74ALS174MX has a wide range of applications, including as memory and registers, in clock and data recovery applications, in counters and shift registers, and in motor control or switching applications. It has a wide range of features and benefits, such as a wide voltage range, low-power consumption and high-speed operation.

The DM74ALS174MX is a single-chip logic circuit with two master-slave edge-triggered flip-flops. Each flip-flop has two sets of inputs and outputs, an enable input, and an asynchronous set-reset input. The fourth input is a clock input for the master-slave edge-triggered flip-flop. Each master-slave flip-flop has a unique output synchronous to the clock signal. The asynchronous master-slave flip-flop also has an asynchronous set-reset input, which allows it to be used as a single set-reset latch.

The DM74ALS174MX circuit works by using two master-slave edge-triggered flip-flops, one for each set of output data. The clock signal is used to activate the master-slave flip-flops. When the clock signal is high, the outputs of both flip-flops will become the same, which depends on the input data. If the clock signal is low, the outputs remain in their current state until the next rising edge of the clock signal.

The DM74ALS174MX also features two additional inputs, the asynchronous reset and set inputs. These can be used to reset or set the output state to either 0 or 1. The asynchronous reset input will reset the outputs to 0, whilst the asynchronous set input will set the outputs to 1.

In short, the DM74ALS174MX logic flip-flop circuit is a robust, high-performance and low-power CMOS logic circuit. It has a wide range of applications, enabling it to be used as a register, counter, or shift register. It also has two additional inputs - an asynchronous reset and set inputs - allowing it to be used as a single set-reset latch. It is a great choice for memory, monitoring and storing state information, and for use in clock and data recovery applications, counters, shift registers and motor control or switching applications.

The specific data is subject to PDF, and the above content is for reference