DM74ALS646WMX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DM74ALS646WMX is a logic device which can be classified under Logic - Buffers, Drivers, Receivers, Transceivers. This device combines a CMOS multiplexer, pad driver and receiver register. It may be used to create systems that can increase the use of a limited number of I/O pins and transfer data across buses. Basically, a DM74ALS646WMX can be defined as a three-state logic device that is a single bidirectional bus driver. It has two independent inputs and one output that can be set in the logic “1”, logic “0”, or in a “high impedance” state.

The basic application of the DM74ALS646WMX is to isolate the higher driving power of the output from the internal processors or other peripherals. It may also be used to transmit an address, data or control information between two points on a single line. This device acts as an interface between the two separate devices that are not electrically compatible or are operating at different bus speeds. As such, DM74ALS646WMX reduces the need for expensive logic adaptors or buffers.

The input to the device is active low and the output is three-state, that is, the device may be enabled (“ON”), disabled (“OFF”), or put in high-impedance state, where the device does not interfere with the normal operation of the other connected devices. When in single-ended mode, the output may be enabled and disabled by changing the state of the control pin. When in differential mode, the output may be toggled between logic “1” and logic “0” or disabled by changing the state of the control pin, but not both.

The DM74ALS646WMX consists of eight Digital Multiply/Divide units, that is, eight 4-bit tens and one 2-bit sum. When this device is used in the case of multiplexing, the data inputs are connected to the tens and the control pin is connected to the sum. The multiplication/division operation is performed by the digital rater, which determines if the signal is a multiplication or division depending on the state of the control signal.

DM74ALS646WMX also has an enable function, where it will enable or disable the output depending on the state of the enable signal. This device may be used for data transmitted in either half or full-duplex mode. The enable signal is used to control the output enable of the device. The output enable is the modem in the device that enables or disables the output for data transmission.

The main advantage of this device is that it is a low-cost and efficient solution to multiplexing and buffering. It can be used in applications such as video signal multiplexing, data conversion, and high-speed serial communication. The wide operating temperature range, low power consumption, and small package size also make it an attractive choice for numerous other applications. It is well suited for applications where high speed and accuracy are a priority.

In conclusion, theDM74ALS646WMX is an excellent choice for a wide variety of applications. It is an efficient and economical solution for multiplexing, buffering, and data conversion. It has a wide operating temperature range and low power consumption, making it well suited for many different applications. Furthermore, it is a low-cost solution that can be used for smaller and less complicated applications, as well as for more complex applications.

The specific data is subject to PDF, and the above content is for reference